When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Removed the front bumper yesterday. Taking it to a shop this afternoon to swap aftermarket HID/ballast because I've been having issues with my stock setup. I'm also hoping to install something that isn't usually installed on sedans. If all goes well, pictures will be provided.
Installed BC coilovers with swift springs. Also installed SPC ball joints and rear camber arms. So far I'm loving the feel. I also installed Vaistech SLV2i to have video capability.
What's going on man!? They're 12/10. I bought them locally slightly used from a member and I'm loving them. I had Sustec NF before. No complaints there either. I'm saving up to widen my rear fenders before I hit the paint booth.
What's going on man!? They're 12/10. I bought them locally slightly used from a member and I'm loving them. I had Sustec NF before. No complaints there either. I'm saving up to widen my rear fenders before I hit the paint booth.
Bought a Carson Tuned grill from a CL member. I plan on painting it gloss black. I was also in need of tires so I picked up a set of Bridgestone Potenza za. I'm wondering if anyone has bought or seen these headlights in person. I need new headlights and these may be an option for me.
Yeah, that's what has the project on hold ...mula! Hopefully I'll pick up some steam January - February and get her painted. I'm going with Lamborghini Balloon White Pearl. A few more updates to come soon with front and rear bumper.
Are the SPC balljoints needed? How much did you lower? I ordered the BC's with swift springs as well, but only have the control arms.
I'm only lowered about 1" in the front and 1.5" in the rear but I'll be adjusting and going lower now that I went with 275/30 tires all around. I was running 35's in the front before. If you don't mind slight camber then you won't need to adjust the front. How low are you planning to drop?
Rear bumper not yet finished because I having the shop working on the front bumper. Both should be done and installed in January. Front bumper sneak peek coming soon.
I'm only lowered about 1" in the front and 1.5" in the rear but I'll be adjusting and going lower now that I went with 275/30 tires all around. I was running 35's in the front before. If you don't mind slight camber then you won't need to adjust the front. How low are you planning to drop?
Probably about the same (f 1in /r 1.5in ). I might go a bit lower later once i find some step lipped 19's. And by slight camber, im assuming approximately < 1 degree?
Probably about the same (f 1in /r 1.5in ). I might go a bit lower later once i find some step lipped 19's. And by slight camber, im assuming approximately < 1 degree?
I'm on 20's but now looking for a set of 19's. I was used to 20's on my previous cars but now looking for a different look. I don't remember how much camber but I'll look for the printout of my alignment and get back to you.
Originally Posted by wickedtaco
Yo Sinatra, where bouts did you purchase the treads?
WickedTaco! Hope all is well man. I got them at a local shop in Miami. Good people. I also purchased my wheels there. Let me know if you would like their number for prices.