The Deadpool SC
05-16-16, 12:39 PM
#106
Lead Lap
Thread Starter
05-18-16, 01:43 PM
#111
Lead Lap
Thread Starter
Just a few parts I've gathered before doing the swap.
-ATI Super Damper
-Gate's Blue Performance Timing Belt (Sourced by Titan Motorsports)
-Tial Q Red 50mm bov (Authentic sourced by Real Street Performance)
-G Plus 16 Row trans cooler
-OBX-R 3" mid pipe
-OBX-R 3"-3.5" single exit exhaust
-OEM gaskets and seals (Sourced by Driftmotion)
-G Plus red silicone radiator hoses
-Mobil1 Full Advance Synthetic 10w-30 oil
-Mobil1 oil filter
-Peak Green coolant
-NGK V-Power spark plugs
-Toyota ATF Type IV trans fluid
-Mishimoto radiator (Sourced by Real Street Performance)
-CX Racing 4" Core FMIC with 3" hot piping & 3" cold piping
-CX Racing 3" air intake
-3" intercooler (Custom piping)
-MKIV Supra throttle cable (Sourced by Driftmotion)
-Treadstone cast iron turbo manifold
-GT35R T4 turbo
-Precision 46mm wastegate (Sourced by Real Street Performance)
-CX Racing stainless steel braided AN4 oil line feed & AN4 return lines
Probably leaving a few things out but I'll update with more if I did.
-ATI Super Damper
-Gate's Blue Performance Timing Belt (Sourced by Titan Motorsports)
-Tial Q Red 50mm bov (Authentic sourced by Real Street Performance)
-G Plus 16 Row trans cooler
-OBX-R 3" mid pipe
-OBX-R 3"-3.5" single exit exhaust
-OEM gaskets and seals (Sourced by Driftmotion)
-G Plus red silicone radiator hoses
-Mobil1 Full Advance Synthetic 10w-30 oil
-Mobil1 oil filter
-Peak Green coolant
-NGK V-Power spark plugs
-Toyota ATF Type IV trans fluid
-Mishimoto radiator (Sourced by Real Street Performance)
-CX Racing 4" Core FMIC with 3" hot piping & 3" cold piping
-CX Racing 3" air intake
-3" intercooler (Custom piping)
-MKIV Supra throttle cable (Sourced by Driftmotion)
-Treadstone cast iron turbo manifold
-GT35R T4 turbo
-Precision 46mm wastegate (Sourced by Real Street Performance)
-CX Racing stainless steel braided AN4 oil line feed & AN4 return lines
Probably leaving a few things out but I'll update with more if I did.
Last edited by MrCJ305; 06-10-16 at 03:44 PM.
05-19-16, 05:43 AM
#114
Lead Lap
Thread Starter
Hey man wassup lol welcome to my world of fun haha. I'm getting there piece by piece. I have a few exterior body pieces too eaiting to be installed as well but that'll happen after the swap.
05-24-16, 10:24 AM
#120
Lead Lap
Thread Starter
The plan as of now is to prep the engine...put everything in. For now it'll be running rebuilt twins. I'll go big single next year. I literally have everything upgraded to prep the way to go single. I just need a manifold, waste gate, turbo, & a standalone ECU.