97 SC300: Just Another 650whp, G6466, ProEFI Daily Driven Stock->NA-T->GTE Build
#16
Driver School Candidate
Thread Starter
#17
Lead Lap
iTrader: (2)
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
I'd do 2 coolers since you are in TX and have to deal with heat, not to mention the traffic in ATX sucks. I'd do one with a puller fan behind it and one without. Your set up is very close to what I am doing, except I am converting to coil on plug and using the digital cam/crank sensors along with Head-Games cam sensor boss in my GE head. I am using GTE cams with a GE motor. PHR makes a driveshaft you can use for the GTE trans and Supra Auto TT rear end. Should be fun. I look forward to updates from you.
Steve
Steve
Sorry, just seen this. Yes, as Steve suggests, go with 2 coolers. BIG coolers. Just be careful about fan placement. If you use a puller fan, make sure it is pulling air towards the radiator, not away from it. You don't want your ATF fan fighting your radiator fan. My setup was a cheapo $30 cooler in front of the biggest ATF cooler I could find. It was a Tru-Cool LPD4739. Rated 40,000 GVW and measures 8.5"x22.75"x1.25". $140 on Amazon. I bought it primarily to try to make my dying transmission last. I did a temperature test using my AEM coolant temp sensor and before adding that big cooler, I seen temps up to 180s. Which is the operating range of the transmission anyway. But by that time, the transmission was just slipping so much. I had no first gear. So then I added that cooler and never saw over 165. It works great. Also, make sure to get a coolant temp sensor so that you can monitor temps. Unless you are doing it through the Pro-EFI. If you have a $3500 built ATF trans, you will want to know the temps at all times.
So, I had the small one in front of the big one. Both in front of the radiator (removed AC condenser). Then had a pusher fan in front of the small cooler pushing all the way through both coolers and the radiator. So it was also helping to aid radiator airflow
![Thumb Up](https://www.clublexus.com/forums/images/smilies/thumbsup.gif)
#20
Driver School Candidate
Thread Starter
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
Sorry, just seen this. Yes, as Steve suggests, go with 2 coolers. BIG coolers. Just be careful about fan placement. If you use a puller fan, make sure it is pulling air towards the radiator, not away from it. You don't want your ATF fan fighting your radiator fan. My setup was a cheapo $30 cooler in front of the biggest ATF cooler I could find. It was a Tru-Cool LPD4739. Rated 40,000 GVW and measures 8.5"x22.75"x1.25". $140 on Amazon. I bought it primarily to try to make my dying transmission last. I did a temperature test using my AEM coolant temp sensor and before adding that big cooler, I seen temps up to 180s. Which is the operating range of the transmission anyway. But by that time, the transmission was just slipping so much. I had no first gear. So then I added that cooler and never saw over 165. It works great. Also, make sure to get a coolant temp sensor so that you can monitor temps. Unless you are doing it through the Pro-EFI. If you have a $3500 built ATF trans, you will want to know the temps at all times.
So, I had the small one in front of the big one. Both in front of the radiator (removed AC condenser). Then had a pusher fan in front of the small cooler pushing all the way through both coolers and the radiator. So it was also helping to aid radiator airflow![Thumb Up](https://www.clublexus.com/forums/images/smilies/thumbsup.gif)
So, I had the small one in front of the big one. Both in front of the radiator (removed AC condenser). Then had a pusher fan in front of the small cooler pushing all the way through both coolers and the radiator. So it was also helping to aid radiator airflow
![Thumb Up](https://www.clublexus.com/forums/images/smilies/thumbsup.gif)
Well actually this is basically a Garrett/precision "hybrid" turbo. The CHRA, compressor wheel is a Garrett 64mm, but the turbine wheel and housing is a Precision turbo. It's custom, but it's basically very similar to the Precision turbos.
Some cleaned up pics...still getting parts together:
![97 SC300: Just Another 650whp, G6466, ProEFI Daily Driven Stock->NA-T->GTE Build-20160423_140657.jpg](https://www.clublexus.com/forums/attachments/build-threads/385621d1461782128t-97-sc300-just-another-650whp-g6466-proefi-daily-driven-stock-na-t-gte-build-20160423_140657.jpg)
![97 SC300: Just Another 650whp, G6466, ProEFI Daily Driven Stock->NA-T->GTE Build-20160423_140638.jpg](https://www.clublexus.com/forums/attachments/build-threads/385622d1461782128t-97-sc300-just-another-650whp-g6466-proefi-daily-driven-stock-na-t-gte-build-20160423_140638.jpg)
The Diff:
![97 SC300: Just Another 650whp, G6466, ProEFI Daily Driven Stock->NA-T->GTE Build-20160425_132836.jpg](https://www.clublexus.com/forums/attachments/build-threads/385623d1461782128t-97-sc300-just-another-650whp-g6466-proefi-daily-driven-stock-na-t-gte-build-20160425_132836.jpg)
![97 SC300: Just Another 650whp, G6466, ProEFI Daily Driven Stock->NA-T->GTE Build-20160425_132849.jpg](https://www.clublexus.com/forums/attachments/build-threads/385624d1461782128t-97-sc300-just-another-650whp-g6466-proefi-daily-driven-stock-na-t-gte-build-20160425_132849.jpg)
#23
Driver School Candidate
Thread Starter
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
I do! See this is the main build thread:
http://www.supraforums.com/forum/sho...CS!&highlight=
This is the fuel system thread:
http://www.supraforums.com/forum/sho...the-parts-list....
And here is the AEM Infinity engine management tuning thread:
http://www.supraforums.com/forum/sho...ere&highlight=
Enjoy! :-}
http://www.supraforums.com/forum/sho...CS!&highlight=
This is the fuel system thread:
http://www.supraforums.com/forum/sho...the-parts-list....
And here is the AEM Infinity engine management tuning thread:
http://www.supraforums.com/forum/sho...ere&highlight=
Enjoy! :-}
#24
Driver School Candidate
Thread Starter
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
Hello so a little update here. I am REALLY looking forward to pushing forward on this SC300 build. I unfortunatily have come to the conclusion that the engine in the Supra is not healthy. So I'm pulling the engine, replacing it, and testing it once it's all done.
I really need to get the Supra up and running before I can really dig in. Here are some pics:
![Name: 20160609_170451.jpg
Views: 2024
Size: 81.9 KB](https://www.clublexus.com/forums/attachments/build-threads/420326d1501270652-97-sc300-just-another-650whp-g6466-proefi-daily-driven-stock-na-t-gte-build-20160609_170451.jpg)
![Name: 20160618_143812.jpg
Views: 2041
Size: 159.1 KB](https://www.clublexus.com/forums/attachments/build-threads/420327d1501270652-97-sc300-just-another-650whp-g6466-proefi-daily-driven-stock-na-t-gte-build-20160618_143812.jpg)
![Name: 20160618_153529.jpg
Views: 2012
Size: 216.1 KB](https://www.clublexus.com/forums/attachments/build-threads/420328d1501270652-97-sc300-just-another-650whp-g6466-proefi-daily-driven-stock-na-t-gte-build-20160618_153529.jpg)
I really need to get the Supra up and running before I can really dig in. Here are some pics:
![Name: 20160609_170451.jpg
Views: 2024
Size: 81.9 KB](https://www.clublexus.com/forums/attachments/build-threads/420326d1501270652-97-sc300-just-another-650whp-g6466-proefi-daily-driven-stock-na-t-gte-build-20160609_170451.jpg)
![Name: 20160618_143812.jpg
Views: 2041
Size: 159.1 KB](https://www.clublexus.com/forums/attachments/build-threads/420327d1501270652-97-sc300-just-another-650whp-g6466-proefi-daily-driven-stock-na-t-gte-build-20160618_143812.jpg)
![Name: 20160618_153529.jpg
Views: 2012
Size: 216.1 KB](https://www.clublexus.com/forums/attachments/build-threads/420328d1501270652-97-sc300-just-another-650whp-g6466-proefi-daily-driven-stock-na-t-gte-build-20160618_153529.jpg)
![Name: 20160618_161317.jpg
Views: 2017
Size: 160.6 KB](https://www.clublexus.com/forums/attachments/build-threads/420329d1501270652-97-sc300-just-another-650whp-g6466-proefi-daily-driven-stock-na-t-gte-build-20160618_161317.jpg)
#25
Driver School Candidate
Thread Starter
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
Don't think I didn't forget about this build! I'm still working on the Supra. I almost have the engine fully assembled and ready to mated to the transmission. I think in 3-4 weeks I can start on this project.
#27
Driver School Candidate
Thread Starter
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
For sure! I am hoping everything goes well with the Supra so I can start this SC300 project! In can anyone is interested, here is the new build thread on Supra Forums:
http://www.supraforums.com/forum/sho...Infinity-Build
http://www.supraforums.com/forum/sho...Infinity-Build
#28
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
Sorry to bring this back up from the dead.... Any updates? I was searching the forums for a write up on wiring the Pro Efi 128 to the aristo tt trans, and came across your thread. Can anyone chime in on how to wire up the aristo tt to the pro efi? (Jdm tt a340 has 7 solenoids and the usdm tt has 5). Only shows the usdm tt on pro efi website. But want to see if anyone has an actual pin out of how to wire up the extra solenoids, or a work around. Thank you.
Thread
Thread Starter
Forum
Replies
Last Post
Shadowen
Performance & Maintenance
27
10-05-10 01:32 PM