Gerxiong89 ultrasonic blue mica build
11-15-18, 11:23 PM
Rookie
Join Date: Jun 2018
Location: Western Australia
Posts: 57
Who did the work on your DRL's (RGB conversion)? Or was it a replacement board?
11-17-18, 12:53 PM
Pole Position
Thread Starter
Join Date: Aug 2016
Location: Ca
Posts: 357
Quote:
Originally Posted by
TRANC3
Who did the work on your DRL's (RGB conversion)? Or was it a replacement board?
Hey I did my own work. I offer the service. Check out my Instagram @gerlicious_performance and @usb_3is350. You can message me on there.
12-28-18, 10:17 PM
Pole Position
Thread Starter
Join Date: Aug 2016
Location: Ca
Posts: 357
2018 was a good year, now onto 2019, stay tune for the new build, til then, happy new year.
The following users liked this post:
01-12-19, 02:25 PM
Pole Position
Thread Starter
Join Date: Aug 2016
Location: Ca
Posts: 357
let's get 2k19 started.....flares built by Kim at ulterior motives.
The following users liked this post:
01-17-19, 09:11 PM
Pole Position
Thread Starter
Join Date: Aug 2016
Location: Ca
Posts: 357
Pick up rcf bumper.
01-18-19, 06:05 AM
Lead Lap
Join Date: Dec 2016
Location: nj
Posts: 554
01-18-19, 10:30 AM
Pole Position
Thread Starter
Join Date: Aug 2016
Location: Ca
Posts: 357
Also got a rc350 fsport rear bumper as well. Might used the diffuser off the rc350...
01-18-19, 07:46 PM
Pole Position
Thread Starter
Join Date: Aug 2016
Location: Ca
Posts: 357
Pick up a gsf front bumper....
02-01-19, 06:23 PM
Pole Position
Thread Starter
Join Date: Aug 2016
Location: Ca
Posts: 357
More parts coming in. Gsf ducts and rc350 diffuser.
02-24-19, 09:44 PM
Pole Position
Thread Starter
Join Date: Aug 2016
Location: Ca
Posts: 357
Oem rcf axle back
Rcf axleback next to is350 axleback
Rcf axle back installed.
The following users liked this post:
02-24-19, 10:03 PM
Driver
Join Date: Mar 2018
Location: TX
Posts: 136
Is the RCF axle back a direct bolt on?
02-25-19, 01:38 AM
Pole Position
Thread Starter
Join Date: Aug 2016
Location: Ca
Posts: 357
Quote:
Originally Posted by
nan88
Is the RCF axle back a direct bolt on?
yes and no. Yes it bolts onto the car but you have to modify the diffuser.
02-25-19, 06:41 AM
Racer
Join Date: Jan 2014
Location: SoCal
Posts: 1,531
Quote:
Originally Posted by Gerxiong89
yes and no. Yes it bolts onto the car but you have to modify the diffuser.
As in cut open or switch out to a 17+ diffuser?
02-26-19, 08:28 AM
Pole Position
Thread Starter
Join Date: Aug 2016
Location: Ca
Posts: 357
Quote:
Originally Posted by
Rudiculous
As in cut open or switch out to a 17+ diffuser?
don't have a 2017 diffuser but I'm sure it will clear. I'm going rcf rear so that's why I went with rcf axleback. However, I did have a RC invidia axleback a while back with my Tom's diffuser and that require some work to fit.
03-01-19, 12:31 PM
Pole Position
Thread Starter
Join Date: Aug 2016
Location: Ca
Posts: 357
Swap out to double bellow front bags so I can run the tru hart front camber arms.
Truhart front camber arm and airlift double bellow installed. Front arms are from previous gen 2is.
Truhart rear traction arm