When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
What did you use to support and lower it? I'd like to do the same at some point to get my bushings taken care of.
Really just the low-profile jack and once I got it on the ground, I dragged it out from under the car all the way to the front. Maxed out the jack stands but I got it out lol! Its just gonna make it so much easier to get the new arms and links on.
Nice! I saw some for cheap that matched my color as well but I wasn't sure if I wanted to go through with trying to wire them up.
There's a couple good write ups on how to wire them up with toggle or the JDM switch. I'm gonna wire mine into the accessory and power off from the ignition. I don't need the other functions like the defrost or power adjustment. If I figure it out then great but I just want the folding option I Certainly didn't think that no one else would bid but it worked out!
Woke up this morning after doing this hitch install on the LS yesterday and took the subframes to the carwash to get the gunk off. Still more to get out but I needed to get ready for work. Put the torch to use and burned the bushings out but I still need to get the diff bushings out. Then spend some money on all the replacement stuff from SerialNine and the last of the ZSS arms. Not even gonna look at the price tags
Look man, I’ll finish it on Sunday morning, it’s too hot outside. Painting them in a Smoky Grey Metallic. Should pop good with the Serial 9 and ZSS pieces
Finally got the paint laid today and probably can use one more coat and it’ll really pop. I should be able to order up the remaining items to finish up all the bushings and link in the days to come. Still on track to have the suspension all refreshed before the holidays
07-09-24, 06:46 AM
I Certainly didn't think that no one else would bid but it worked out!
