Finally got around to painting my rear calipers.
https://cimg1.ibsrv.net/gimg/www.clu...878ccc3f6c.jpg
https://cimg2.ibsrv.net/gimg/www.clu...1ac54de770.jpg

looks good!!

Vinyl wrapped the front bumper piece in gloss black. It was my first time using 3M knifeless tape, the left side turned out pretty trash because I pulled it off first. The right side turned out decent.

https://cimg4.ibsrv.net/gimg/www.clu...ec1660b810.jpg

Sooo clean! :thumbup:

Thanks! I'm loving my mods so far. Will need to re-wrap my chrome trim eventually, but still digging it.

Car looks great! What procedure and paint did you use for the calipers if I may ask?

Thanks! I used the VHT High Temp spray paint in Burnt Copper.

Got back from Charlotte and there was some light left, wanted to give it a quick rinse, but decided to install some 3M Door Edge Guards and wrap one side of the side mirror.

https://cimg7.ibsrv.net/gimg/www.clu...8c9d45d585.jpg
https://cimg4.ibsrv.net/gimg/www.clu...039a53e8b4.jpg

Installed a vinyl sticker over the front Lexus emblem for a smoky effect to mimic the black pearl emblem.

https://cimg0.ibsrv.net/gimg/www.clu...fb53b14ad1.png

Where did you get the emblem?

https://cimg3.ibsrv.net/gimg/www.clu...19ae2a5c0a.jpg
https://cimg2.ibsrv.net/gimg/www.clu...dccc5c12f8.jpg
Stuck on a cheap black F-Sport badge from ebay, not sure how I feel about it. Might take it off, or wait for it to fall off by itself...whichever comes first.

Looks tacky bro. It looks cleaner debadged.

Yeah, was already on Amazon shopping for Goo Gone 10 minutes after I stuck it on. Would've probably felt 5% better about it had the badge actually went on flat. Since that area of the trunk is curved, the top left corner has a bit of gap.

Installed a reflective emblem in the front
https://cimg9.ibsrv.net/gimg/www.clu...1930f45d96.jpg
decal