My 01 Celsior build
#1
Driver School Candidate
Thread Starter
My 01 Celsior build
Just thought I would document and share the progress on my Celsior build. Imported it from Japan with 79k KMs, and have driven about 6k now and couldn't be happier. She is a CF Interior Selection (same as UL), so fully loaded. If you guys have any rare OEM JDM accessories for sale let me know, especially looking for rear seat foot rest. Don't really have any set plans currently.
Already got my coilovers in, went with BCracing extreme lows (14k/12k) and the rears still don't go low enough, if anyone has rear youzealand lowering blocks for sale let me know. This is how she sits now
and yes wheels are already on the way
Already got my coilovers in, went with BCracing extreme lows (14k/12k) and the rears still don't go low enough, if anyone has rear youzealand lowering blocks for sale let me know. This is how she sits now
and yes wheels are already on the way
Last edited by peenlrd; 08-04-18 at 03:37 PM.
#4
Driver School Candidate
Thread Starter
Got my wheels on, 326POWER Yabaking Spoke, 19x9.5 +35 235/35 (needs a bit of a spacer) 19x10.5 +23 265/30, fits perfect just need a little roll. And yes I plan on lowering the rear some more
#5
Pole Position
Get some 326Power wheel nuts on those johnnies to finish the look. This thing is screaming for a full JDM VIP look. As for JDM accessories, have a search around Japan or New Zealand, as that's really about the only place you'll find them
#6
Driver School Candidate
Thread Starter
Can't bring my self to spend 300$ on lug nuts lol. I've been scouring yahooauctions Japan, just kinda hoping I can find something in North America already.
#8
Driver School Candidate
Thread Starter
#9
Driver School Candidate
Thread Starter
Got my front spacers in (15MM), fitment is right where I want it. Just need to lower the rear still and then get some proper pictures.
Last edited by peenlrd; 08-18-18 at 04:50 PM.
#11
Driver School Candidate
Thread Starter
#12
Lexus Test Driver
iTrader: (3)
#13
Driver School Candidate
Thread Starter
Got my grom audio installed, very easy install. Took out the glove box 12V socket and routed the USB cable through the hole. Pleased with the results, although sometimes there is crackling, going to try a different USB cable and see if that fixes it.
Thread
Thread Starter
Forum
Replies
Last Post
Kyle4207
2Gen IS250 / IS350 / IS-F Classifieds (06-13)
2
12-21-14 12:50 PM