2015 GS350 F RWD Build
#93
#94
Instructor
Lol it sounds like clublexus needs to fund a Airbnb and trailer in California for you to do runs!!
#95
Driver
Thread Starter
Trying to avoid all of the salt the throw out, pipes are too shiny to get all salty. While I have it on the lift I plan to install those USRS from RR Racing but I need to get a feeler gauge and then I will add another gasket between the two sections of the Invidia mid-pipe because it has a small leak.
#97
Driver
Thread Starter
Finally some video for #eddie420. Found a way to rig a camera, no image stabilization, the car is reasonably loud (but a good kind of loud). Says its processing, don't know how long that will take.
#98
Instructor
WOW. Car should have came like this from the factory, definitely gets up and goes !! Thanks!!!
#99
Finally some video for #eddie420. Found a way to rig a camera, no image stabilization, the car is reasonably loud (but a good kind of loud). Says its processing, don't know how long that will take.
#101
Driver
Thread Starter
@PilotX - Any updates with the car? Curious to see your overall impressions.
Will let you know.
#102
Was driving around today and was throwing codes. Appears that an O2 codes P013A/P013C will put on the CEL and disable the cruise control. It went into limp mode again today while on the highway, I accelerated on Auto and it went into limp mode. Those two codes were pending and the random misfire code also. Strange. Until I can correlate actions to results I won't take it to the shop as everybody knows that cars run perfect when they go to the vet! Oddly enough, flogging the car (which is very fun) doesn't result in codes unless i let the car bounce off the rev limiter.
Will let you know.
Will let you know.
The following users liked this post:
GrizzlyMan (08-30-21)
The following 4 users liked this post by PilotX: