2006 LS430 VIP build
#17
Driver
Thread Starter
#22
The following users liked this post:
styloren (03-22-21)
#24
Driver
Thread Starter
Replaced the door seals
The doors have been squeaking for quite some time and finally I'm able to replace the seals.
Subwoofer is also getting replaced.
I can listen to the doors pop open and close all day, It sounds so sealed.
Subwoofer is also getting replaced.
Last edited by Wlpls430; 03-25-21 at 05:19 AM.
#25
Driver
Thread Starter
My 19" Work Meisters finally came in & some parts...
After waiting 8 months (7 months from Japan and 1 month to have it refinished), I finally got my wheels. I also bought a new b pillar black trim, OEM sub (ended up not agreeing with my amp) and front passenger speaker (not pictured)....
I still need to shave the rears, only then will I adjust my air presets. And hoping next week I can install my short knuckles/RCA's, ball joints, along with the tranny mount.
Day trip to San Diego to pick up the wheels (survived a total of 11+ hours of driving).
Raw brushed finish with clear powder coat.
Ceramic Coated.
Test fitting.
Still hoping I won't need a pull 🤞🏼
On feet.
Close, but coming together.
You can really see the brushed texture pop. Worth the additional one month wait.
I still need to shave the rears, only then will I adjust my air presets. And hoping next week I can install my short knuckles/RCA's, ball joints, along with the tranny mount.
Day trip to San Diego to pick up the wheels (survived a total of 11+ hours of driving).
Raw brushed finish with clear powder coat.
Ceramic Coated.
Test fitting.
Still hoping I won't need a pull 🤞🏼
On feet.
Close, but coming together.
You can really see the brushed texture pop. Worth the additional one month wait.
Last edited by Wlpls430; 04-15-21 at 03:23 AM.