Numair's Atomic Silver IS350 F Sport
#1
Driver
Thread Starter
Numair's Atomic Silver IS350 F Sport
Exterior
- Seibon CF Front Lip
- Aimgain FRP Rocker Panels
- Aimgain CF Diffuser
- Bella CF Duckbill Trunk
- OEM JDM Door Visors
- Full Acrylic Rear Emblem
- Gloss Black Mirror Housings
- OEM Premium Start/Stop Button
- OEM Frameless Rearview Mirror
- OEM Illuminated Door Sills
- OEM Premium Cup Holder Pads
- OEM 17+ Cup Holder Assembly
- OEM Non-ML Radio Control *****
- We Are Likewise Shifter
- Hydrodipped Trims
- Bolstered Steering Wheel
- OEM JDM 17+ Tail Lamps
- OEM JDM Head Lamps
- OEM JDM Fog Lamps
- Lasfit Lighting Kit
- OEM F Sport Intake with AEM Dryflow Filter
- Lexon Axleback
- Vibrant Resonators
- Cusco Front Strut Tower Brace
- Ultra Racing V-Brace
- OdinSUS Air Struts
- Airlift 3P Air Management
- SPC Rear Camber Arms
- GSF Front LCA Bushing
- SSR MS3
- F: 19x9 +29 MD
- R: 19x10 +37 NR
- Hankook Ventus V12 evo2
- F: 225/35/19
- R: 245/35/19
- Project Kics R40 Iconix
____________________________________________________________
____________________________________________________________
What's up everyone! Just purchased my 2015 IS350 F Sport a couple weeks ago. Was in a TL for about 6 years and wanted a change. So far I'm loving it.
Stuff I've done since purchasing:
Invidia Q300 Axleback
AEM Dryflow intake filter
LED conversion for any and all halogens
iJDMToy Foglights
18% Tint all around w/ 60% windshield
Tein Street Advance Z
Last edited by numair3is; 07-08-24 at 09:58 PM.
The following users liked this post:
numair3is (01-21-21)
#3
Driver
Thread Starter
Got the height dialed more evenly now. Sold the Invidia and picked up an F Sport Performance exhaust. Installed the F Sport intake and Cusco strut tower bar under the hood. R1 slotted rotors and gloss black calipers all around with ceramic pads (no more horrendous brake dust). Swapped the blinding iJDM fogs and went with Winjet. Got the window switch trims and glovebox trim hydro dipped in forged composite. Thinking about buying the OEM F Sport trunk lip.
Last edited by numair3is; 01-21-21 at 09:09 PM.
The following users liked this post:
Soldat79 (07-19-21)
The following users liked this post:
numair3is (01-28-21)
#5
Driver School Candidate
Exhaust
Got the height dialed more evenly now. Sold the Invidia and picked up an F Sport Performance exhaust. Installed the F Sport intake and Cusco strut tower bar under the hood. R1 slotted rotors and gloss black calipers all around with ceramic pads (no more horrendous brake dust). Swapped the blinding iJDM fogs and went with Winjet. Got the window switch trims and glovebox trim hydro dipped in forged composite. Thinking about buying the OEM F Sport trunk lip.
#6
Driver
Thread Starter
The following users liked this post:
Alonzo3000 (04-08-21)
The following 2 users liked this post by numair3is:
Alonzo3000 (04-08-21),
mferraro (02-09-21)
Trending Topics
#9
Driver
Thread Starter
It definitely feels more planted. I actually softened my damping a little bit to allow a bit more travel since it was noticeably tighter. Also looks amazing paired with the F sport intake. 10/10 recommend!
#10
It absolutely looks better! I just haven't heard anyone speak on the actual handling effects. They are pretty inexpensive anyways so I guess it doesnt hurt to try it out. I have an aftermarket AEM intake so I would love to see it under the hood! Thanks for your help bud,
#12
Driver
Thread Starter
Purchased some Stance SF01s through Aspec wheels. Not too many wheels look great on this car and its hard to find wheels that fit over the front brakes but also in the very narrow wheel wells. Loving how it looks. Also replaced the cluster lens, multi display lens, and the clock as the last owner seemed to have used harsh chemicals on them.
The following 2 users liked this post by numair3is:
Alonzo3000 (04-08-21),
Napalvr (02-10-21)
#13
Purchased some Stance SF01s through Aspec wheels. Not too many wheels look great on this car and its hard to find wheels that fit over the front brakes but also in the very narrow wheel wells. Loving how it looks. Also replaced the cluster lens, multi display lens, and the clock as the last owner seemed to have used harsh chemicals on them.
I like your choice in wheels. Vossens here.
The following users liked this post:
Alonzo3000 (04-08-21)
#14
Driver
Thread Starter
Looks great! Is your taillight tint an overlay?
The following users liked this post:
Alonzo3000 (04-08-21)