When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Looks great! Killed me when you said you put your wife’s car first so if it failed at least it was her car hahahahaha….had me dying for a bit because that’s exactly what I would have done lol especially centering it and making sure it’s parallel (OCD just like me).
The struggle is real. I measured this garage out way too many times before putting it in.
Her car weighs about 1k more than both of mine, so it was a good test. I’d love to replace her car with a Toyota product, so I figured it was a win win. If it holds, great! If it fails, crap… but great!
9’ 1”. The lift is 9’ 3”. I really thought it was too low, but after discovering the trick creepers, I’m happy with the height. The creepers are way cheaper than vaulting a ceiling.
Pulled out the sensor that was throwing codes. It doesn’t appear to be oem. I had ordered an oem one at autozone. I should have known better and checked the part numbers.
New sensor from rock auto says Denzo right on the side of it. Hopefully I won’t have any CELs now.
The car got some fresh oil as well, and an ECU reset. I’ll drive it a bit when the weather breaks, and then top off the transmission fluid. I’d like to let it retune itself before I leave it running in place on the lift, as it’s running pig rich after an ECU reset.