Build Threads Details on Club Lexus 3GS owner vehicles

Oceans13 GS460

Thread Tools
 
Search this Thread
 
Old 08-11-21, 06:57 PM
  #16  
Oceans13
Advanced
Thread Starter
 
Oceans13's Avatar
 
Join Date: Apr 2020
Location: FL
Posts: 506
Received 214 Likes on 131 Posts
Default

Originally Posted by KevGS460ML
awesome. Looks like you’ve saves yourself a lot of downtime and maybe even expenses. Hopefully this car will last a long time to come!
Thanks Kev. I look forward to being done with all this and just enjoying the car.



Replaced the rear airbag crash sensor and re-installed the airbag module.

Also installed the Bluetooth streaming audio thing. Just gotta get the rear sub installed and i'll have nice jams finally.

I started the car and was half expecting the bags to deploy in my face, but the airbag light actually went away for the first time since I had the car. I guess those are fixed. I also fixed rattles in the dash speaker, doors, and sunroof rail.

And last but definitely not least, all that remains is to install the ABS. I asked a few local independent shops, but installation / programming and brake bleed requires TechStream, which they didn't have. I went to Lexus of North Miami to see about having them install it, but their customer service is horrible. Will try JM Lexus instead.

Last edited by Oceans13; 08-11-21 at 07:08 PM.
The following users liked this post:
KevGS460ML (08-11-21)
Old 08-11-21, 11:30 PM
  #17  
petershen
Pit Crew
 
petershen's Avatar
 
Join Date: Apr 2013
Location: Singapore
Posts: 174
Received 66 Likes on 41 Posts
Default

Great idea using the box wrench to hold the lock nut
Definitely beats cutting and welding the door support frame

I'll need to replace the ABS pump at some point, it's buzzing away more often than it should.

Seems like 44510-30300 is the new part number, did you buy it brand new? The old one that's in my car is 44510-30270
Old 08-13-21, 07:00 PM
  #18  
Oceans13
Advanced
Thread Starter
 
Oceans13's Avatar
 
Join Date: Apr 2020
Location: FL
Posts: 506
Received 214 Likes on 131 Posts
Default


The BMS and a new brake fluid cap to help keep moisture out


Blown ML sub was shorting out the entire system


Got this 10" subwoofer. Peeled the rubber ring and put in on the bottom of the new sub. The wire connectors just screwed on.

sounds great

Last edited by Oceans13; 05-14-22 at 08:31 AM.
The following 3 users liked this post by Oceans13:
Boomin (08-16-21), mrbondy (08-17-21), petershen (08-13-21)
Old 08-22-21, 08:31 PM
  #19  
Kira X
美少女戦士セーラームーン

iTrader: (24)
 
Kira X's Avatar
 
Join Date: Oct 2008
Location: 東京都
Posts: 11,244
Received 431 Likes on 355 Posts
Default

This is an incredible thread! You did some amazing work and your car looks great now.
The following 2 users liked this post by Kira X:
hanifh (09-30-22), Oceans13 (01-21-22)
Old 08-27-21, 05:32 AM
  #20  
Oceans13
Advanced
Thread Starter
 
Oceans13's Avatar
 
Join Date: Apr 2020
Location: FL
Posts: 506
Received 214 Likes on 131 Posts
Default

Thank you Kira!
Quick update

Techstream customization. Turned off the steering wheel tilt when you start the car. Now it just stays down and extended. Turned off the DRLs. Turned off open locks when shifting to park. And turned off a bunch of chimes and buzzers and other noises. Car feels more luxurious now.

Last edited by Oceans13; 05-15-22 at 12:14 PM.
The following users liked this post:
petershen (08-28-21)
Old 08-29-21, 05:02 AM
  #21  
Oceans13
Advanced
Thread Starter
 
Oceans13's Avatar
 
Join Date: Apr 2020
Location: FL
Posts: 506
Received 214 Likes on 131 Posts
Default

Hey Peter The lenses were for sale in the FB group, but I got the last set. However Id recommend buying the entire headlight than changing the lenses honestly.







Last edited by Oceans13; 05-14-22 at 08:30 AM.
Old 09-01-21, 05:06 PM
  #22  
Oceans13
Advanced
Thread Starter
 
Oceans13's Avatar
 
Join Date: Apr 2020
Location: FL
Posts: 506
Received 214 Likes on 131 Posts
Default

Thanks Peter. Th e Morimotos are nice, and I liked the Infiniti Q45 projectors that some put in their GS300 headlights.

Update: Soundproofing and sway bar links..



Didnt get to it last time.


Drivers


Passangers


Rear

Threw the sway bar end links on


Sound deadening is pretty nice. Keeps the music inside and the road noise outside. The doors also feel more solid and less hollow and close nicer. Car feels overall more luxurious.

Last edited by Oceans13; 05-14-22 at 08:29 AM.
The following users liked this post:
mrbondy (09-04-21)
Old 09-12-21, 03:03 PM
  #23  
Oceans13
Advanced
Thread Starter
 
Oceans13's Avatar
 
Join Date: Apr 2020
Location: FL
Posts: 506
Received 214 Likes on 131 Posts
Default


Installed new sway bar bushings. Quite a difference between the old and the new.


Noticed what appears to some dried coolant which had leaked down. Seems to be coming from the water pump. I ordered parts for a replacement. (Pump, therm, belt, pulley).


Ordered an all wood shifter from an RX, as I did with my GS300, but this one isnt fitting well. Going to figure out what to do with it.


Love the Japanese woodtrim.


Love the blackwood with my black carpets.



Another drain and fill.

Last edited by Oceans13; 07-20-22 at 07:28 AM.
The following 2 users liked this post by Oceans13:
hanifh (09-30-22), PANICiii (02-18-24)
Old 10-20-21, 07:15 AM
  #24  
Oceans13
Advanced
Thread Starter
 
Oceans13's Avatar
 
Join Date: Apr 2020
Location: FL
Posts: 506
Received 214 Likes on 131 Posts
Default


Soundproofed the trunk / rear deck. The sub hits harder now.

Changed some hoses.
Cleaned the TB

Also the maf


Water pump / parts (old vs new)

Last edited by Oceans13; 07-20-22 at 07:24 AM.
The following users liked this post:
petershen (10-20-21)
Old 10-27-21, 06:28 AM
  #25  
Oceans13
Advanced
Thread Starter
 
Oceans13's Avatar
 
Join Date: Apr 2020
Location: FL
Posts: 506
Received 214 Likes on 131 Posts
Default Finally finished (for a long time hopefully)



Looked for a long time for a set of bigger Lexus oem wheels but decided to just leave the 18”s and get new tires. Ordered some sumitomo tires 🇯🇵 Had them Balanced, mounted, and alignment.


Old bridgestone rundlats from 2015.


Five months later. Finished with the 460. It runs drives sounds and looks amazing now

Last edited by Oceans13; 07-20-22 at 07:14 AM.
The following 5 users liked this post by Oceans13:
hanifh (09-06-22), lwphat66 (10-28-21), mrbondy (10-28-21), petershen (10-27-21), ThomasGS4 (07-07-23)
Old 10-27-21, 10:54 AM
  #26  
petershen
Pit Crew
 
petershen's Avatar
 
Join Date: Apr 2013
Location: Singapore
Posts: 174
Received 66 Likes on 41 Posts
Default

What a great journey and beautiful car

I wish the OEM fanblades are wider. The GS is under-tired from the factory... I found that by going to 275/35 makes the drive much more enjoyable, the car feels much more planted and alive.
The following 2 users liked this post by petershen:
hanifh (09-06-22), Oceans13 (10-28-21)
Old 10-29-21, 01:13 PM
  #27  
Oceans13
Advanced
Thread Starter
 
Oceans13's Avatar
 
Join Date: Apr 2020
Location: FL
Posts: 506
Received 214 Likes on 131 Posts
Default

Thanks guys.

Last edited by Oceans13; 05-14-22 at 08:23 AM.
The following 7 users liked this post by Oceans13:
Boomin (10-29-21), dreadzz (03-10-23), Idorablo (11-15-21), mrbondy (10-31-21), PANICiii (02-18-24), RSJSC400 (08-18-22), ThomasGS4 (07-07-23) and 2 others liked this post. (Show less...)
Old 11-12-21, 12:19 PM
  #28  
Bastrd6
Pit Crew
 
Bastrd6's Avatar
 
Join Date: May 2019
Location: GA
Posts: 124
Received 88 Likes on 43 Posts
Default

Originally Posted by Oceans13
Hey Peter The lenses were for sale in the FB group, but I got the last set. However Id recommend buying the entire headlight than changing the lenses honestly.
What did you use on the outside amber marker?
Old 11-14-21, 08:58 PM
  #29  
Oceans13
Advanced
Thread Starter
 
Oceans13's Avatar
 
Join Date: Apr 2020
Location: FL
Posts: 506
Received 214 Likes on 131 Posts
Default

Originally Posted by Bastrd6
What did you use on the outside amber marker?
those are inside the lenses, i just removed them while the housings were apart. Also the other chrome reflector pieces as well.
The following users liked this post:
Bastrd6 (11-15-21)
Old 11-15-21, 06:43 PM
  #30  
Bastrd6
Pit Crew
 
Bastrd6's Avatar
 
Join Date: May 2019
Location: GA
Posts: 124
Received 88 Likes on 43 Posts
Default

Originally Posted by Oceans13
those are inside the lenses, i just removed them while the housings were apart. Also the other chrome reflector pieces as well.
Ah good to know! Will probably do that when I have the new projectors tossed in.

Thanks!


Quick Reply: Oceans13 GS460



All times are GMT -7. The time now is 03:39 AM.