When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Tru trac 8.8 with 4.10 final drive New bearings installed Pinion installed in a nice clean case Dustin m checking the pinion depth/height with ford factory tools 🧰
Tru trac 8.8 with 4.10 final drive New bearings installed Pinion installed in a nice clean case Dustin m checking the pinion depth/height with ford factory tools 🧰
Had a few hours in the garage today, got out some sand paper and the drill with wire wheel disks to clean up the diff for some wrinkle black paint. Should be able to paint it today then get the grannas cover and cradle installed on the diff After 2 hours of wirewheel and sand paper Cleaned in a automotive parts washer first
That case looks great. Sub’d for an awesome build - its great to see a good local build!
thanks bud! Nice meeting you as well! Waiting on a bunch of parts still, once I get the majority of stuff I’ll start pickup up the pace and getting things knocked out. The Vht wrinkle paint is a pain unless you have lots of time to do it lol. I had to resand half the case again and repaint it cause half wrinkled half didn’t 🤦🏽♂️
Rolled her out of the garage for the first time this year 👀. Coilovers should be there this week, guess it’s time to pull the motor and rear subframe to start getting stuff ready
Had a hour in the garage tonight ! Started working on pulling the battery, HID boxes, intake and piping, harness, and radiator hoses. Should be able to drain the fluids, pull interior engine harness, and finish pulling the radiator tomorrow on my lunch break.
Got my Mazworx diff bushings and decided to throw them in during my lunch break. Threw them in the freezer for 2 days and the tapped in 80% of the way. Then used a few washers and a c clamp to finish it off. Great quality and fast shipping from Mazworx’s
Wife had the day off and was able to give me a hand pulling the hood, finally had time to yank the motor out. 324k and tan like a charm. Time to cleanup the bay, delete some holes, and tuck some wires. Might paint and shave it 😎💀