General Car Conversation 2024 - part 1
#1278
Lexus Champion
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
Access and heat management, I would also place high importance of minimizing external lines of any sorts and if you have them place them right up top and clustered like how they are on my TT Audi.
I also don't think it's worth it, I tried my dads 5.0 supercharged Range Rover and while sure it's powerful (more powerful than ANY Toyota and faster as well and that just stock) it doesn't fundamentally change the towing experience other than I don't have to go to 4500-5k RPM if I need to get moving a bit faster than I would otherwise prefer to like is needed in the Sequoia. It's not going any faster, both are air cars and control the load very well, the RR has better brakes but that is expected as when it's not loaded the thing is shockingly fast for what it is and needs to be able to back up the power with at least some semblance of handling.
Issue is that it is supercharged and that's far less worrisome than turbos, even so you still need to mind the clutch, oil, belt, and spark plugs will need done every 40k vs 90-120k for an NA engine. Heat load is higher as well.....and again if the truck is a tool is it really worth it?
I also don't think it's worth it, I tried my dads 5.0 supercharged Range Rover and while sure it's powerful (more powerful than ANY Toyota and faster as well and that just stock) it doesn't fundamentally change the towing experience other than I don't have to go to 4500-5k RPM if I need to get moving a bit faster than I would otherwise prefer to like is needed in the Sequoia. It's not going any faster, both are air cars and control the load very well, the RR has better brakes but that is expected as when it's not loaded the thing is shockingly fast for what it is and needs to be able to back up the power with at least some semblance of handling.
Issue is that it is supercharged and that's far less worrisome than turbos, even so you still need to mind the clutch, oil, belt, and spark plugs will need done every 40k vs 90-120k for an NA engine. Heat load is higher as well.....and again if the truck is a tool is it really worth it?
![Striker223 is offline](https://www.clublexus.com/forums/images/statusicon/user_offline.gif)
#1279
Lexus Champion
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
This isn't like when the 5.7 came out and NUKED the field for about 5-7 years. Toyota showed up with a prior gen setup vs a 2 gen newer one like they did last time.
![Striker223 is offline](https://www.clublexus.com/forums/images/statusicon/user_offline.gif)
#1281
Lexus Fanatic
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
None because they went from V8s to inlines other than ford, and also that's the entire point lol! Toyota is DOA in this segment, utterly outgunned by the domestics on anything over a 1500 and at the 1500 level is outclassed for serviceability and overall product features/package. It's not 2007 anymore when the tundra/sequoia really where THAT much better. Toyota just released the 3.5TT with the hybrid stuffs and it BARELY caught up to the 10 year old F150 and now has already fallen behind the 500hp Ram inline 6s that will almost certainty have orders of magnitude more support.
This isn't like when the 5.7 came out and NUKED the field for about 5-7 years. Toyota showed up with a prior gen setup vs a 2 gen newer one like they did last time.
This isn't like when the 5.7 came out and NUKED the field for about 5-7 years. Toyota showed up with a prior gen setup vs a 2 gen newer one like they did last time.
I don’t see any I6 RAMs on Ram.com
A turbo doesn’t need service. Repair of replacement is different, but Toyota is not gonna make it easy to change a turbo to save the customer a few bucks out of warranty. This is just Toyota negativity for the sake of being negative because it’s a Toyota.
Last edited by Toys4RJill; 02-11-24 at 06:30 PM.
![Toys4RJill is offline](https://www.clublexus.com/forums/images/statusicon/user_offline.gif)
#1282
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
Or could’ve thrown the 8 speed from the LX or a 10 speed trans on it. I’ve only towed with our LX once so far and I was very impressed. Hydraulic suspension kept the load leveled.
![BayeauxLex is offline](https://www.clublexus.com/forums/images/statusicon/user_offline.gif)
#1283
Lexus Fanatic
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
Last edited by SW17LS; 02-11-24 at 06:44 PM.
![SW17LS is offline](https://www.clublexus.com/forums/images/statusicon/user_offline.gif)
#1284
Lexus Fanatic
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
I doubt there is any performance advantage in the 8 speed
![Toys4RJill is offline](https://www.clublexus.com/forums/images/statusicon/user_offline.gif)
#1287
Lexus Fanatic
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
How many could they have sold if people weren’t concerned about this? It’s just something Toyota doesn’t do well, engineering for ease of repair.
![SW17LS is offline](https://www.clublexus.com/forums/images/statusicon/user_offline.gif)
#1289
Lexus Test Driver
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
Anybody who has ever worked on a Toyota product can tell you they really do suck at packaging for serviceability. It even dates back to the 1UZ era. I absolutely hated working on my 1UZ(and I was under the hood a lot).
As far as going to inlines, only Dodge is doing that so far in the gasoline powered trucks. GM did introduce an inline-6 diesel for the 1500's which seems to be pretty popular, though I have heard of timing chain/belt issues(can't remember if it's a belt or a chain).
@LexsCTJill look for the 2025 RAM 1500 on their website. They do list the Hurricane 3.0 engine. It's their new inline-6 that is going to be in the '25 trucks. '24 MY trucks still have the 5.7 Hemi.
And more gears is actually incredibly useful for a vehicle that tows. Moreso than for a grocery getter. The automakers that know about work trucks(ie, the domestics) have been increasing their gear counts for a reason.
As far as going to inlines, only Dodge is doing that so far in the gasoline powered trucks. GM did introduce an inline-6 diesel for the 1500's which seems to be pretty popular, though I have heard of timing chain/belt issues(can't remember if it's a belt or a chain).
@LexsCTJill look for the 2025 RAM 1500 on their website. They do list the Hurricane 3.0 engine. It's their new inline-6 that is going to be in the '25 trucks. '24 MY trucks still have the 5.7 Hemi.
And more gears is actually incredibly useful for a vehicle that tows. Moreso than for a grocery getter. The automakers that know about work trucks(ie, the domestics) have been increasing their gear counts for a reason.
![FrankReynoldsCPA is offline](https://www.clublexus.com/forums/images/statusicon/user_offline.gif)
#1290
Lexus Test Driver
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
If you have a major repair that could very well have to be done during the normal life of the vehicle, and that repair is sufficiently a PITA, that absolutely can drive buyers away.
I know plenty of people, myself included, who will not buy vehicles that use a timing belt because we don't want an expensive regular maintenance item that requires you to tear down the front of your engine. If people are looking at a car and realize that the cab has to come off to service/replace a part that could very well go out during their ownership, they'll be discouraged from buying.
Unfortunately I don't know of anybody using a hot V in the half-ton segment. Ford uses a hot-v setup for their 6.7 powerstroke in the HD pickups. GM's Duramax does not use this configuration IIRC. RAM's 6.7 cummins is an inline-6 so that's not relevant there.
I know plenty of people, myself included, who will not buy vehicles that use a timing belt because we don't want an expensive regular maintenance item that requires you to tear down the front of your engine. If people are looking at a car and realize that the cab has to come off to service/replace a part that could very well go out during their ownership, they'll be discouraged from buying.
Unfortunately I don't know of anybody using a hot V in the half-ton segment. Ford uses a hot-v setup for their 6.7 powerstroke in the HD pickups. GM's Duramax does not use this configuration IIRC. RAM's 6.7 cummins is an inline-6 so that's not relevant there.
![FrankReynoldsCPA is offline](https://www.clublexus.com/forums/images/statusicon/user_offline.gif)