So I bought a 1990 RX-7 convertible
04-11-06 | 06:42 PM
#16
Super Moderator
Joined: Oct 2002
Posts: 30,120
Likes: 231
From: Canada
Originally Posted by saleem
Thanks for the idea. I didnt know I had the privilege to upload my own library of pictures. Its under my username. Clublexus member gallery . Let me know if you guys can see it please 
04-11-06 | 09:47 PM
#17
Thread Starter
Pole Position
Joined: Jun 2005
Posts: 290
Likes: 0
From: IL
Originally Posted by MikeFD3S
Be careful with the overheating, that's the number one killer of rotary engines. If the needle budges you need to be worried. The temperature gauge does not change linearly.
Get the compression tested on that car ASAP, and inspect the coolant for oil. A good compression check is to leave the coolant fill cap off and turn on the car. If you get a geyser of coolant, your cooling seals are toast.
I've owned quite a few of these cars over the years...rx-7's and the rotary engine are wonderful cars when properly maintained. Excluding Miatas, Rx-7's have historically had some of the best handling for a compact RWD platform.
Get the compression tested on that car ASAP, and inspect the coolant for oil. A good compression check is to leave the coolant fill cap off and turn on the car. If you get a geyser of coolant, your cooling seals are toast.
I've owned quite a few of these cars over the years...rx-7's and the rotary engine are wonderful cars when properly maintained.
Excluding Miatas, Rx-7's have historically had some of the best handling for a compact RWD platform.
04-11-06 | 09:48 PM
#18
Thread Starter
Pole Position
Joined: Jun 2005
Posts: 290
Likes: 0
From: IL
Originally Posted by LexArazzo
Yup it's there : https://www.clublexus.com/gallery/sh...ser/37376/sl/s
04-12-06 | 08:53 AM
#20
Thread Starter
Pole Position
Joined: Jun 2005
Posts: 290
Likes: 0
From: IL
Originally Posted by MikeFD3S
Yes thats correct :P sounds strange, but that's the easist telltale sign without plunking down for a full leakdown test just yet.
do you know what it could be ? its not slipping. The clutch kit was installed a year ago and the car sat for almost a year. I was thinking its the clutch bearing or something. I really wish he had installed the OEM clutch I ****ing hate these aftermarket clutches there is no need unless you have a really powerfull car or something.
Thread
Thread Starter
Forum
Replies
Last Post
