Ford’s RWD platform: ‘we’re working on it’
01-09-08, 05:55 PM
#1
Super Moderator
Thread Starter
Ford’s RWD platform: ‘we’re working on it’
Ford’s RWD platform: ‘we’re working on it’
Posted on Wednesday 9 January 2008
Ford has been notoriously quiet on the subject of rear-wheel drive development over the last few years. The company showed two RWD concepts at last year’s NAIAS - the Ford Interceptor and the Lincoln MKR - but Ford never tipped either for production reality. Today, however, Ford confirmed a RWD plan is in the works. The RWD platform will share the global platform from Ford’s Australian-market works. That means it will probably be based on the same underpinnings as the next-generation Ford Falcon - and given the performance of the current Falcon platform, it would be a welcome addition to Ford’s arsenal.
Ford’s Australian division recently released an updated Falcon that sports a 302kW (404hp) 5.4L V8 engine in several FPV (Ford Performance Vehicles) models, and in standard trim has the option of a 260kW (349hp) V8, a 245kW (328hp) turbocharged six-cylinder or a normally aspirated 190kW (254hp) six. Available with either four or six-speed automatic transmissions or a six-speed manual, the Falcon has a drivetrain feature set not found in many sedans offered in the U.S. The next-generation Falcon should be even more impressive. As the success of the Cadillac CTS is proving, there is room for powerful, luxurious American-made sedans - even in the otherwise stagnant U.S. car market - and Ford has all the tools it needs to build one.
Ford’s recent announcement of it’s EcoBoost (renamed TwinForce) turbocharged engines might mean the upcoming RWDs could skip the massive V8s found in the Australian market cars. But skipping out entirely on the V8 - at least as an option - would be a mistake in our opinion. Even the best twin-turbo six-cylinders can’t match the magic and muster that a big V8 can produce. We’ll have to wait for Ford to build the mythical beast before we can measure its horn, however.
And of course, it won’t actually be built in Australia because of practicality issues - it’s just too far from the U.S. to make shipment economical and the exchange rate between the Aussie and U.S. dollars is not favorable at the moment, reports Automotive News. But leveraging the work done in Australia to build a better North American-made car is just what the newly-number-three U.S. automaker might need to right its ship in the performance sedan market.
Posted on Wednesday 9 January 2008
Ford has been notoriously quiet on the subject of rear-wheel drive development over the last few years. The company showed two RWD concepts at last year’s NAIAS - the Ford Interceptor and the Lincoln MKR - but Ford never tipped either for production reality. Today, however, Ford confirmed a RWD plan is in the works. The RWD platform will share the global platform from Ford’s Australian-market works. That means it will probably be based on the same underpinnings as the next-generation Ford Falcon - and given the performance of the current Falcon platform, it would be a welcome addition to Ford’s arsenal.
Ford’s Australian division recently released an updated Falcon that sports a 302kW (404hp) 5.4L V8 engine in several FPV (Ford Performance Vehicles) models, and in standard trim has the option of a 260kW (349hp) V8, a 245kW (328hp) turbocharged six-cylinder or a normally aspirated 190kW (254hp) six. Available with either four or six-speed automatic transmissions or a six-speed manual, the Falcon has a drivetrain feature set not found in many sedans offered in the U.S. The next-generation Falcon should be even more impressive. As the success of the Cadillac CTS is proving, there is room for powerful, luxurious American-made sedans - even in the otherwise stagnant U.S. car market - and Ford has all the tools it needs to build one.
Ford’s recent announcement of it’s EcoBoost (renamed TwinForce) turbocharged engines might mean the upcoming RWDs could skip the massive V8s found in the Australian market cars. But skipping out entirely on the V8 - at least as an option - would be a mistake in our opinion. Even the best twin-turbo six-cylinders can’t match the magic and muster that a big V8 can produce. We’ll have to wait for Ford to build the mythical beast before we can measure its horn, however.
And of course, it won’t actually be built in Australia because of practicality issues - it’s just too far from the U.S. to make shipment economical and the exchange rate between the Aussie and U.S. dollars is not favorable at the moment, reports Automotive News. But leveraging the work done in Australia to build a better North American-made car is just what the newly-number-three U.S. automaker might need to right its ship in the performance sedan market.
01-10-08, 06:39 AM
#5
Lexus Fanatic
RWD platforms are nothing new from most of the companies you mentioned.
Chevy has always had RWD platforms.....Corvette, Silverado, TrailBlazer, Tahoe, and Suburban.
Dodge has done the RWD Viper since 1991, the RWD Charger and Magnum for several years, and, of course, like Chevy, RWD trucks and SUV's....and is getting ready to release the RWD Challenger. Chrysler, of course, has already had the RWD 300, Aspen SUV, Prowler street rod (transferred from Plymouth), and Crossfire sports car.
Pontiac has had the RWD version of the Torrent and the RWD Solstice for a few years, too.
Hyundai? Yes, that would be something new........at least in the American market.
Last edited by mmarshall; 01-10-08 at 06:44 AM.
Thread
Thread Starter
Forum
Replies
Last Post
