Low Cost Wheels
#47
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
I copied this from the M5board.com website:
Not sure who told you that they were strong....The MHTs aren't that strong bro...the barrels are made in China. There is a local LS460L who we put (at his request) 21" Vendettas....they balanced terribly and we have replaced the barrels 3x so far in 6 months.
I would have never thought MHT wheels would be that problematic. They aren't cheap at all. The MHT brand has been around a long time and they have a really good quality look to them. I have always wondered why not many people buy them. The dealer who said this doesn't vouch for them but I wonder if this is an isolated event.
Another example that spending big bucks doesn't mean you get a superior wheel.
Not sure who told you that they were strong....The MHTs aren't that strong bro...the barrels are made in China. There is a local LS460L who we put (at his request) 21" Vendettas....they balanced terribly and we have replaced the barrels 3x so far in 6 months.
I would have never thought MHT wheels would be that problematic. They aren't cheap at all. The MHT brand has been around a long time and they have a really good quality look to them. I have always wondered why not many people buy them. The dealer who said this doesn't vouch for them but I wonder if this is an isolated event.
Another example that spending big bucks doesn't mean you get a superior wheel.
#49
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
I've read the thread, and basically gathered these points:
-Any wheel can crack and is prone to defect
-Price is not representative of quality
-Wheel design (monoblock, 3-piece, etc.) does not denote quality
These are all symptoms--these "bad batches" are an effect of the "good enough" mindset that manufacturers have. Spec range is too wide that when each manufacturer/supplier provides something "good enough," that "insignificant" defect builds in a way that a wheel, if completely refined/forged/cast, cut, and finished in-house, wouldn't be within reasonable spec as a finished product.
-Any wheel can crack and is prone to defect
-Price is not representative of quality
-Wheel design (monoblock, 3-piece, etc.) does not denote quality
These are all symptoms--these "bad batches" are an effect of the "good enough" mindset that manufacturers have. Spec range is too wide that when each manufacturer/supplier provides something "good enough," that "insignificant" defect builds in a way that a wheel, if completely refined/forged/cast, cut, and finished in-house, wouldn't be within reasonable spec as a finished product.
#50
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
Since part of my problem with high cost wheels is the lack of good customer service by dealers, I thought I'd add this link.
http://www.mbworld.org/forums/w211-a...ic-closed.html
http://www.mbworld.org/forums/w211-a...ic-closed.html
#54
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
http://www.mbworld.org/forums/w211-a...ing-crack.html
Another thread link with expensive wheels not performing up o their price point.
I would have never thought AMG's though.
Another thread link with expensive wheels not performing up o their price point.
I would have never thought AMG's though.
Thread
Thread Starter
Forum
Replies
Last Post
NUTEKWHLS
Club Lexus Vendor Product Announcements
0
12-01-11 03:26 PM