FD RX7 reliability?
#2
Lexus Fanatic
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
Rotary engines have always had some issues. They have poor low-RPM torque, get poor gas mileage, use more oil on the average than conventional piston engines, have relatively weak apex-rotor seals (comparable to a conventional engine's piston rings), pollute a lot requiring a lot of emissions hardware, and, on carburated versions, sometimes have flooding issues on cold starts, creating big clouds of smoke. Parts for them can also be expensive because there relatively few places to get them. But they are small, light, help the car have ideal weight distribution and a low center of gravity for good handling, and rev almost as smoothly as an electric motor; virtually vibration-free.
Aside from that, later models of the RX-7 (the early 90's twin-turbo version) were very lightly constructed, with a lot of thin aluminum parts. They were known for being like a tin can, both in road noise because of lack of insulation and for bending and warping suspension/chassis parts on bumps and rough roads.
Aside from that, later models of the RX-7 (the early 90's twin-turbo version) were very lightly constructed, with a lot of thin aluminum parts. They were known for being like a tin can, both in road noise because of lack of insulation and for bending and warping suspension/chassis parts on bumps and rough roads.
Last edited by mmarshall; 01-24-09 at 04:00 PM.
#4
Lexus Test Driver
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
i think the question needs to be
"how unreliable is a FD RX-7?"
As mmarshall mentioned, with the smoothness of the engine and its ability to develop large HP numbers with Turbos and whatnot, rotaries are rarely driven "quietly" so the apex seals tend to not hold up well...and that pretty much requires you get a new engine.
A friend of mine has had a FD RX-7 for about 2-3 years now, and is currently in the midst of putting in his second engine (it is also his second RX-7).
"how unreliable is a FD RX-7?"
As mmarshall mentioned, with the smoothness of the engine and its ability to develop large HP numbers with Turbos and whatnot, rotaries are rarely driven "quietly" so the apex seals tend to not hold up well...and that pretty much requires you get a new engine.
A friend of mine has had a FD RX-7 for about 2-3 years now, and is currently in the midst of putting in his second engine (it is also his second RX-7).
#5
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
I have two friends, one who owns a FC (87') and the other a FD (93'). They are constantly wrenching but that's what they enjoy. Plus those are not their daily drivers. I wouldn't recommend you purchasing an FD if it's your daily driver. They are known for needing rebuilds before 100,000 miles.
Trending Topics
#8
Pole Position
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
You should not use RX7 and reliability in the same sentence. Just look up Apex Seals or Rat's Nest as some initial advise....
#10
Lexus Fanatic
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
from what I know they are definetely not a very reliable motor. The new renesis motors are better, but still torqueless and no *****. Thats why the rx7 had a tubo. I think the new Renesis motors are outputting like total of 1.3 liters and make a monsterous 210-220 hp. My old civic was also 1.3 liter.
Last edited by I8ABMR; 01-24-09 at 11:27 PM.
#12
Lexus Fanatic
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
Aside from that, later models of the RX-7 (the early 90's twin-turbo version) were very lightly constructed, with a lot of thin aluminum parts. They were known for being like a tin can, both in road noise because of lack of insulation and for bending and warping suspension/chassis parts on bumps and rough roads.
#13
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
from what I know they are definetely not a very reliable motor. The new renesis motors are better, but still torqueless and no *****. Thats why the rx7 had a tubo. I think the new Renesis motors are outputting like total of 1.3 liters and make a monsterous 210-220 hp. My old civic was also 1.3 liter.
#14