When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
The trim on my C class is the same as that of the GLK, not in terms of the rubber lining up, but in terms of the dull weathered look. A simple coat of Back to Black makes a huge different.
Perhaps having owned 6 Lexus vehicles has "ruined" me in terms of elevating my standards on what's expected in a luxury car regarding fit and finish.
True, I've found plenty of 'short cuts' on all makes and models including Lexus, though Lexus tends to lead. Acura also assembles their cars with Swiss-watch like quality
interior trim pieces in my C class do not align perfectly. This doesn't bother me as much as rattles, squeaks, other noises, which drive me up the wall. Everything in otherwise solid in the benz
True, I've found plenty of 'short cuts' on all makes and models including Lexus, though Lexus tends to lead. Acura also assembles their cars with Swiss-watch like quality
Yeah, no one is immune from these glitches. Some do it better than others though. The ES for example has taken its share of lumps not so much for fit, gut for less than stellar materials.
Yeah, no one is immune from these glitches. Some do it better than others though. The ES for example has taken its share of lumps not so much for fit, gut for less than stellar materials.
Yes the plastics are not as nice, but the assembly is still above much of the industry
interior trim pieces in my C class do not align perfectly. This doesn't bother me as much as rattles, squeaks, other noises, which drive me up the wall. Everything in otherwise solid in the benz
Same here, which is why the XC60 would never see my money just from the squeaky door handle, which BTW, was a problem with all four doors, on BOTH XC60s in the showroom! I don't understand how that passed initial design or even assembly quality inspections. From the "Lexus book", this first of all would not have left the design stage, but if it hit the assembly stage, this would have been fixed with some felt tape in between the plastic trim pieces to eliminate the gap, flex, and hence the squeak.
There is a Buick LaCrosse at work that I walk past in the parking lot almost every morning. The driver's side front and rear doors do not align and it is REALLY obvious in the chrome trim around the door window frames. The trim takes a big, obvious jog where the rear of the front door meets the front of the rear door. Just looking at it is painful and makes me wonder how the doors could seal against the rain.
Sorry that I don't have a picture.
I guess what makes it worse is that it is sitting in the parking lot of an aircraft manufacturer. If our aircraft had such obvious misalignments they would not be allowed to fly.
Top tip: sit in a car you're interested in, grab the front center tunnel (where the cup holders are) with both hands (one on either side) and try to move it side to side. In some cars (Dodge/Chrysler, Mazda) it will actually move, others (Honda) it remains rock solid.
The trim pieces, fittings and panel gaps are no where as good compared to even cheap Japanese cars.
Let alone luxury brands like Lexus or Acura..
Lol. Have friends with few year old e-class and 3 series and others and they're like tanks with no trim issues. Audi on the other hand I think is more like fancy vw and not on the same level.
Top tip: sit in a car you're interested in, grab the front center tunnel (where the cup holders are) with both hands (one on either side) and try to move it side to side. In some cars (Dodge/Chrysler, Mazda) it will actually move, others (Honda) it remains rock solid.
Top tip: sit in a car you're interested in, grab the front center tunnel (where the cup holders are) with both hands (one on either side) and try to move it side to side. In some cars (Dodge/Chrysler, Mazda) it will actually move, others (Honda) it remains rock solid.
Everyone cheaps out in certain places. You make a good point but I was disgusted when recently riding in the back of a brand new Honda Accord. The door panel noticeably flexed when the window was rolled down and then rolled all the way back up- it made the entire assembly seem cheap and flimsy.