Exclusive Auto-Detailing: SoCal
#108
Former Sponsor
Thread Starter
Hey everyone,
Car was in pretty bad shape. Needed lots of claying! I didnt take any before pictures
Process:
Wash
Clay
SIP w/ orange pad @ 1500 rpm
106ff w/ white pad @ 1300 rpm
JETSEAL
Enjoy!
Car was in pretty bad shape. Needed lots of claying! I didnt take any before pictures
Process:
Wash
Clay
SIP w/ orange pad @ 1500 rpm
106ff w/ white pad @ 1300 rpm
JETSEAL
Enjoy!
#109
Former Sponsor
Thread Starter
Hey everyone. Hope all is good!
First up Toyota Tacoma.
This is a 2000 tacoma. Never been detailed and its outside. Had a lot of oxidation and swirls.
Process:
Wash
Clay
SIP w/ orange pad @ 1600 rpm
106ff w/ white pad @ 1300 rpm
Z5pro
before:
before:
after:
before:
after:
before:
after:
First up Toyota Tacoma.
This is a 2000 tacoma. Never been detailed and its outside. Had a lot of oxidation and swirls.
Process:
Wash
Clay
SIP w/ orange pad @ 1600 rpm
106ff w/ white pad @ 1300 rpm
Z5pro
before:
before:
after:
before:
after:
before:
after:
#112
1) How long did it take you to do the Green Toyota Tacoma?
2) How much would you charge for the work on that?
3) When you wet sand...how abrasive is the sand paper?
4) And what are the following?
•SIP w/ orange pad @ 1600 rpm
•106ff w/ white pad @ 1300 rpm
•Z5pro
•Jet Seal
2) How much would you charge for the work on that?
3) When you wet sand...how abrasive is the sand paper?
4) And what are the following?
•SIP w/ orange pad @ 1600 rpm
•106ff w/ white pad @ 1300 rpm
•Z5pro
•Jet Seal
#113
Lexus Champion
Join Date: Dec 2007
Location: Upland CA (Inland Empire)
Posts: 2,080
Likes: 0
Received 0 Likes
on
0 Posts
Hey, i always saw this thread and was amazed by your work...few questions
on your 2 options the only difference i can see is this
● One-step abrasive cleaner polish applied by machine
and for the $100 more you get this...
● Multiple abrasive compounding/polishing steps applied by machine
can you really tell a difference between one being used versus the other?
on your 2 options the only difference i can see is this
● One-step abrasive cleaner polish applied by machine
and for the $100 more you get this...
● Multiple abrasive compounding/polishing steps applied by machine
can you really tell a difference between one being used versus the other?
#116
Former Sponsor
Thread Starter
1) How long did it take you to do the Green Toyota Tacoma?
2) How much would you charge for the work on that?
3) When you wet sand...how abrasive is the sand paper?
4) And what are the following?
•SIP w/ orange pad @ 1600 rpm
•106ff w/ white pad @ 1300 rpm
•Z5pro
•Jet Seal
2) How much would you charge for the work on that?
3) When you wet sand...how abrasive is the sand paper?
4) And what are the following?
•SIP w/ orange pad @ 1600 rpm
•106ff w/ white pad @ 1300 rpm
•Z5pro
•Jet Seal
1. The Tacoma took about 4 1/2 hours
2. All my packages/prices are listed on my website under the service page!
3. I usually use 3000grit
4. SIP = menzerna super intensive polish
106ff = menzerna 106ff nano polish
z5pro = zaino z5pro
jetseal = chemical guys jet seal
#117
Former Sponsor
Thread Starter
Hey, i always saw this thread and was amazed by your work...few questions
on your 2 options the only difference i can see is this
● One-step abrasive cleaner polish applied by machine
and for the $100 more you get this...
● Multiple abrasive compounding/polishing steps applied by machine
can you really tell a difference between one being used versus the other?
on your 2 options the only difference i can see is this
● One-step abrasive cleaner polish applied by machine
and for the $100 more you get this...
● Multiple abrasive compounding/polishing steps applied by machine
can you really tell a difference between one being used versus the other?
#118
Former Sponsor
Thread Starter
#120
Former Sponsor
Thread Starter
Hey everyone. Did these cars a while back but finally had the chance to post them up.
First up,
BMW M3.
Car was sitting in the shop for a few months and was very dusty. Car needed A LOT of claying!
Process:
Wash
Clay
SIP w/ orange pad @ 1600 rpm
106ff w/ white pad @ 1300 rpm
jet seal
before:
before:
after:
before:
First up,
BMW M3.
Car was sitting in the shop for a few months and was very dusty. Car needed A LOT of claying!
Process:
Wash
Clay
SIP w/ orange pad @ 1600 rpm
106ff w/ white pad @ 1300 rpm
jet seal
before:
before:
after:
before: