When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Its a one day job... once shops get the hang of it it'll be less. If you are in California, we will be working with WOW Auto in Poway on installs and sending our Cali customers to them. It pays to go to someone who will be doing installs so that you don't pay someone to learn.
The stock fuel system is maxed out at the current power level. Over the winter/spring we will do development on larger injectors that will allow more power and/or e85. Larger injectors on this car is not a simple task due to the complex direct/port fuel injection control.
Rafi
one day! Man that's way less than my air suspension install! Good job. Can't wait to place my order
I am posting this on behalf of ISFinferno. Eddie is working on some custom carbon fiber engine covers for the ISF Supercharger setup. If any of you who have purchased or are thinking of purchasing the SC are interested, please let us know and we will proceed with this project:
-Rafi
Hello Everyone,
I know we have been super exited to finally see the Super Charger set up for the IS-F and soon RC-f and GS-f. I have been working with Rafi on some Carbon fiber items for the IS-F, RC-f and GS-F. The following items will be available soon. I want to get a feel for what everyone thinks. RR-Racing will be exclusive dealer for the following items. For those who bought the carbon fiber tubing kit you can now have the following;
1. Full carbon fiber engine cover. $625.00
2. Carbon Fiber rear fender arches as found on the RC-f and GS-F. $300.00
3. Carbon fiber window switches (GS-F) (overlay) $750.00
4. Full carbon fiber GS-F and RC-F door sills. (overlay and real carbon coming soon) will need your oem for exchange. $625.00
5. Carbon Fiber mirrors. GS-F, RC-F and IS-F. (overlay) $450.00
6. RC-F and GS-F center trim on the steering wheel. (exchange required) $ 250.00
Many other items coming soon also. Again if you have any question feel free to contact Rafi and he will guide you and answer any and all your questions. Pictures to follow in the next day or so. Keep an eye out fellows.
__________________
We Engineer Track Proven Upgrades For Your Lexus! SUPERCHARGERS : ECU TUNING : SUSPENSION : EXHAUST : PPE MASTER DEALER
Well, these kits are not exactly mass production, so right now we are just doing one color.
I don't see why it wouldn't fit RHD. I kind of wish we get some orders from Japan, given that this kit is far superior to anything put out by iCode or J&K, at a significantly lower price We buy JDM Japanese stuff, lets see if they buy USDM stuff....
We had a discussion in the KCLV thread then it started to go off topic about the S/C so I thought I'd bring it back here where it belongs.
Can you clarify if there will be a smaller pulley option for those at altitude to compensate for the -2.5 psi hole were in here at 5,000'+ ??
Thx
It can be done, but it may affect the Rotrex warranty so that is something to consider. I know many who spin the Rotrex +10% over the rating without issue as long as the oil runs sufficiently cool.
In any case, our initial setup ran 4.5psi and we still managed about 500whp.
Rafi
__________________
We Engineer Track Proven Upgrades For Your Lexus! SUPERCHARGERS : ECU TUNING : SUSPENSION : EXHAUST : PPE MASTER DEALER
Thx for the response, so what is the standard pulley size 97/95mm?? And what would you need to go to for us up here to achieve what the sea level customers are going to get, 92mm or 10% over the rating for Rotrex??
I'm just going off of some of the pulley sizes that the ESS S/C kit for the M3 was and what some of the guys had to go to (smaller diameter pulley) to achieve the same boost level at sea level. A lot of those guys were here in Denver, and some were in Johannesburg, South Africa and places around the world.
I am posting this on behalf of ISFinferno. Eddie is working on some custom carbon fiber engine covers for the ISF Supercharger setup. If any of you who have purchased or are thinking of purchasing the SC are interested, please let us know and we will proceed with this project:
-Rafi
Hello Everyone,
I know we have been super exited to finally see the Super Charger set up for the IS-F and soon RC-f and GS-f. I have been working with Rafi on some Carbon fiber items for the IS-F, RC-f and GS-F. The following items will be available soon. I want to get a feel for what everyone thinks. RR-Racing will be exclusive dealer for the following items. For those who bought the carbon fiber tubing kit you can now have the following;
1. Full carbon fiber engine cover. $625.00
2. Carbon Fiber rear fender arches as found on the RC-f and GS-F. $300.00
3. Carbon fiber window switches (GS-F) (overlay) $750.00
4. Full carbon fiber GS-F and RC-F door sills. (overlay and real carbon coming soon) will need your oem for exchange. $625.00
5. Carbon Fiber mirrors. GS-F, RC-F and IS-F. (overlay) $450.00
6. RC-F and GS-F center trim on the steering wheel. (exchange required) $ 250.00
Many other items coming soon also. Again if you have any question feel free to contact Rafi and he will guide you and answer any and all your questions. Pictures to follow in the next day or so. Keep an eye out fellows.
can I see a better pic of the mirror overlays? from further away...you have a black car and I wanna see what it looks like from a little distance as I have a black one too
can I see a better pic of the mirror overlays? from further away...you have a black car and I wanna see what it looks like from a little distance as I have a black one too