Help me make a spoiler
#2
Super Moderator
iTrader: (34)
Irving - sorry none of the above for me . It makes the car looks like a ricer car for me.. meaning no class at all . If I want to add something to my car , it should not only be functional but also aesthetically pleasing . That is just my opinion though. Maybe a lot will like it . It was as though you got a spoiler and plastered it on top of an SC... not something designed taking into consideration the whole shape of the SC .
Our trunk or the car's end is not flat ...it has a concave (convex depending on how you look at it) shape at the rear.
Those I boxed ...being straight lines doesn't fall in line with the roundness of the SC butt . It is even more pronounced on the lower part because that part of the trunk is not flat.
Check the original 92 SC spoiler .. .build from there if I were to be asked. Like no overhang on the quarter panels and make it higher instead of being just flat . But if you observe its shape it follows the contours of the SC rear end.
This is the original 92-96 spoiler . I personally (may not be for others ) would like something similar in shape but goes higher just like yours. Then maybe I can consider trying one for my Old Man Tan's SC. I currently have the original one there but I like it higher to make it more functional for me but retaining it's good looks.
Something like this in height for me.
Again .. this is just my personal preference .. probably not for the many. You have to do something that will be liked by the majority and be profitable. So get the opinion of the majority WHO WILL BUY YOUR PRODUCT and not just be wishful thinkers so you don't waste time and money.
Our trunk or the car's end is not flat ...it has a concave (convex depending on how you look at it) shape at the rear.
Those I boxed ...being straight lines doesn't fall in line with the roundness of the SC butt . It is even more pronounced on the lower part because that part of the trunk is not flat.
Check the original 92 SC spoiler .. .build from there if I were to be asked. Like no overhang on the quarter panels and make it higher instead of being just flat . But if you observe its shape it follows the contours of the SC rear end.
This is the original 92-96 spoiler . I personally (may not be for others ) would like something similar in shape but goes higher just like yours. Then maybe I can consider trying one for my Old Man Tan's SC. I currently have the original one there but I like it higher to make it more functional for me but retaining it's good looks.
Something like this in height for me.
Again .. this is just my personal preference .. probably not for the many. You have to do something that will be liked by the majority and be profitable. So get the opinion of the majority WHO WILL BUY YOUR PRODUCT and not just be wishful thinkers so you don't waste time and money.
Last edited by gerrb; 05-20-16 at 03:35 PM.
#3
Lexus Test Driver
iTrader: (3)
Irving - sorry none of the above for me . It makes the car looks like a ricer car for me.. meaning no class at all . If I want to add something to my car , it should not only be functional but also aesthetically pleasing . That is just my opinion though. Maybe a lot will like it . It was as though you got a spoiler and plastered it on top of an SC... not something designed taking into consideration the whole shape of the SC .
Our trunk or the car's end is not flat ...it has a concave (convex depending on how you look at it) shape at the rear.
Those I boxed ...being straight lines doesn't fall in line with the roundness of the SC butt . It is even more pronounced on the lower part because that part of the trunk is not flat.
Check the original 92 SC spoiler .. .build from there if I were to be asked. Like no overhang on the quarter panels and make it higher instead of being just flat . But if you observe its shape it follows the contours of the SC rear end.
This is the original 92-96 spoiler . I personally (may not be for others ) would like something similar in shape but goes higher just like yours. Then maybe I can consider trying one for my Old Man Tan's SC. I currently have the original one there but I like it higher to make it more functional for me but retaining it's good looks.
Something like this
Again .. this is just my personal preference .. probably not for the many. You have to do something that will be liked by the majority and be profitable.
Our trunk or the car's end is not flat ...it has a concave (convex depending on how you look at it) shape at the rear.
Those I boxed ...being straight lines doesn't fall in line with the roundness of the SC butt . It is even more pronounced on the lower part because that part of the trunk is not flat.
Check the original 92 SC spoiler .. .build from there if I were to be asked. Like no overhang on the quarter panels and make it higher instead of being just flat . But if you observe its shape it follows the contours of the SC rear end.
This is the original 92-96 spoiler . I personally (may not be for others ) would like something similar in shape but goes higher just like yours. Then maybe I can consider trying one for my Old Man Tan's SC. I currently have the original one there but I like it higher to make it more functional for me but retaining it's good looks.
Something like this
Again .. this is just my personal preference .. probably not for the many. You have to do something that will be liked by the majority and be profitable.
#4
The Supra's rear actually arches upward though, unlike the SC whose rear is relatively flat. I think the angle may be doing it injustice though, as the top line in particular has already been worked on to line up with the curvature of the roofline.
These images are just prototypes, so we will be doing finishing touches, but my question was more "do we extend it onto the 1/4panel body lines, or do we end it at the trunk line?".
Trending Topics
#11
Intermediate
I'd go with B if i had to pick. Reminds of the wise spoiler. And if it is going that route maybe it needs to be a little more agressive? But i say extend to the quarter panel
Last edited by SC510; 05-21-16 at 02:26 AM.
#12
Driver School Candidate
Join Date: May 2016
Location: CA
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
I made an account just to get in on this. I would prefer B. It flows with the body line better instead of looking slapped on just the trunk.
I'll be looking for the group buy thread. Keep us posted!
I'll be looking for the group buy thread. Keep us posted!
#15
Driver School Candidate
I'm down with A. a little shorter by maybe 1/4 inch but also in carbon. If you could add a rear brake light to it. something simple and LEDish to update the car a little. that would be cool.
Or Maybe same height just a hole in the middle like this one. But instead of the two legs going from the wing down. maybe use your shape you have already and have the spoiler touch the trunk at the ends with style A. Just imagine this spoiler without the middle connection to the spoiler.
Or Maybe same height just a hole in the middle like this one. But instead of the two legs going from the wing down. maybe use your shape you have already and have the spoiler touch the trunk at the ends with style A. Just imagine this spoiler without the middle connection to the spoiler.