McGard Tuner Wheel High-End Lug Nut and Lock Special Buy!!!
04-06-05 | 10:27 AM
#76
Originally Posted by DoubleWhoosh
Ok, the bulk of the orders are on their way except for 2 and the ones with special order parts. Should be delivered before the end of the week! 
TM Engineering
TM Engineering
All the ones in the picts are chrome.
04-07-05 | 07:52 PM
#82
Lead Lap
Joined: Mar 2001
Posts: 692
Likes: 0
From: California
Was anyone here buying these new lugs a part of the Sewell Lexus 17" OZ Superturismo deal?
If so, I'm interested in purchasing the lugs that came with your wheels if they are still new (they ran out) and you want to let them go pretty cheap.
e-mail me:
vchang@caltech.edu
Thanks!
If so, I'm interested in purchasing the lugs that came with your wheels if they are still new (they ran out) and you want to let them go pretty cheap.
e-mail me:
vchang@caltech.edu
Thanks!
04-10-05 | 09:37 PM
#87
Thread Starter
Lexus Test Driver
Joined: Feb 2001
Posts: 1,185
Likes: 6
From: California
Oops!!! FORGOT TO MENTION TO EVERYONE!!!
The recommended torque settings for these are lower than most, due to the washer seat.
60-70 lbs/ft is probably what you will be looking to tighten them to. You'll know what I'm talking about when they are tightened, you can feel it.
I'll update this info on the first post as well.
So sorry I forgot to mention that!
The recommended torque settings for these are lower than most, due to the washer seat.
60-70 lbs/ft is probably what you will be looking to tighten them to. You'll know what I'm talking about when they are tightened, you can feel it.
I'll update this info on the first post as well.
So sorry I forgot to mention that!
04-10-05 | 11:47 PM
#88
Originally Posted by DoubleWhoosh
Oops!!! FORGOT TO MENTION TO EVERYONE!!!
The recommended torque settings for these are lower than most, due to the washer seat.
60-70 lbs/ft is probably what you will be looking to tighten them to. You'll know what I'm talking about when they are tightened, you can feel it.
I'll update this info on the first post as well.
So sorry I forgot to mention that!
The recommended torque settings for these are lower than most, due to the washer seat.
60-70 lbs/ft is probably what you will be looking to tighten them to. You'll know what I'm talking about when they are tightened, you can feel it.
I'll update this info on the first post as well.
So sorry I forgot to mention that!
thanks for doing the lugs for me todd..... if i did them myself i would have put on 80lb easy....
