D2-AUTOSPORT

Still available, contact us for a quote

combfilter

iTrader: (3)

Derrick. Please take a look at this.
https://www.clublexus.com/forums/sho...d.php?t=281969

He has them on a 350 with no mention of spacers or rubbing. Are you sure about them not working on the 350? I like these rims and am curious about them clearing.

Thanks,

D2-AUTOSPORT

I have no idea about that guy or his wheels / car. I know MRR will not guarantee fitment over IS350 calipers and neither will we.

J-RO

Hey Derrick will the GT-1 in a 20" fit on a 2007 iS 250 RWD if so how much

D2-AUTOSPORT

Yes, I'll PM you a quote

D2-AUTOSPORT

UPDATE

We are in the process of co-ordinating with a member to test fit a 19" GT1 over the caliper of a IS350 to get concrete evidence of fitment. (Have had no success with local cars to arrange a test fit thusfar)

I will report finding ASAP!

combfilter

iTrader: (3)

They clear the calipers just fine. The problem is that they rub on the fronts. If you are good with a heat gun you can fix this.

Question is, why are you bothering with the fit when you already stated:

duckduck

I would still like to know what D2 finds out from their test fitment. Maybe they'll change their minds about the guarantee after the test fitment.

mwaull

AWESOME! I know if these would fit the IS350 i would ordering a set of 20s right now!!! Lemme know!

D2-AUTOSPORT

We are going to be test fitting a couple different wheels, so please bear with us. Will report findings ASAP

D2-AUTOSPORT

Will have a update on the 19" GT1 / IS350 by late this / early next week.

duckduck

any updates?

Phanatik

iTrader: (1)

The GT-1's fit a 350. I have a set on my car. I have 19's, 8.5 front and 9.5 rears. The TPMS works just fine with them. But they do rub on the front on a little corner where the wheel wall sticks out the furthest. But you just use a heat gun to push in that piece sticking out and you're fine.

blackdc4

any love for 1st gen is300 owners?

D2-AUTOSPORT

Thanks for the post, my test fit customer has yet to report back findings (couldn't get a local person to test fit).

But your post is excellent support of my practice of not giving a blanket co-sign on something I have not PERSONALLY tested. From a business aspect the minute I say "it fits", and someone has rubbing on a fender lip, the whole world comes crashing down! Some people are ok with minor mods, some people act as if heating up plstic is as major as cutting the roof off! Lol

Thanks again for your post.