**TTC Dual Fuel Pump Hanger for Lexus SC300/400**
#1
**TTC Dual Fuel Pump Hanger for Lexus SC300/400**
MVP is proud to announce the introduction of the TTC SC300/SC400 billet dual fuel pump hanger. These hangers are produced from T6 6061 billet aluminum and allow for the Lexus owner to simply bolt on the two Walbro fuel pumps, rather than have a homemade and dangerous situation.
The billet dual fuel pump hangers feature:
*** T6 6061 billet aluminum construction.
*** Anodized finish for a lifetime of use
*** Dual bulkhead fittings with Viton seals
*** All hardware needed for installation
*** Dual cups for Walbro 255L/hr pumps
The pump hangers listed below are an example of the manufacturers high quality and attention to detail. While the SC300/400 hanger is slightly different, it will follow the same formula.
We are now taking preorders for these ultra high quality billet pump hangers. Please PM me with order info, e-mail Kevin@MVPmotorsports.com or call MVP at 940-683-8282 Here is an example of a Toyota fuel pump hanger; note the attention to detail and ultra high quality.
MSRP - $425
Pre-Order Price - $375
Deadline - 01/31/07
If you have any further questions feel free to post.
Regards,
Kevin
The billet dual fuel pump hangers feature:
*** T6 6061 billet aluminum construction.
*** Anodized finish for a lifetime of use
*** Dual bulkhead fittings with Viton seals
*** All hardware needed for installation
*** Dual cups for Walbro 255L/hr pumps
The pump hangers listed below are an example of the manufacturers high quality and attention to detail. While the SC300/400 hanger is slightly different, it will follow the same formula.
We are now taking preorders for these ultra high quality billet pump hangers. Please PM me with order info, e-mail Kevin@MVPmotorsports.com or call MVP at 940-683-8282 Here is an example of a Toyota fuel pump hanger; note the attention to detail and ultra high quality.
MSRP - $425
Pre-Order Price - $375
Deadline - 01/31/07
If you have any further questions feel free to post.
Regards,
Kevin
#4
To be on the pre-order official list and receive the discount price of $375, I need you to e-mail, PM, or call in the following:
First and last name
Address
Telephone Number
Credit Card
Exp Date
CREDIT CARD WILL NOT BE CHARGED UNTIL ITEM IS READY TO SHIP!
Thanks,
Kevin
First and last name
Address
Telephone Number
Credit Card
Exp Date
CREDIT CARD WILL NOT BE CHARGED UNTIL ITEM IS READY TO SHIP!
Thanks,
Kevin
#6
i see the deadline for when u have to be ordered for pre-order
but are these already made in CAD or something so that they just have to be sent off?
curious how long until they're ready to ship. . .
also, can i get this in purple? lol, curious if you are just sending them different materials.
but are these already made in CAD or something so that they just have to be sent off?
curious how long until they're ready to ship. . .
also, can i get this in purple? lol, curious if you are just sending them different materials.
Last edited by ConSynX; 01-12-07 at 09:20 AM.
#7
Thanks for your interest.
i see the deadline for when u have to be ordered for pre-order
but are these already made in CAD or something so that they just have to be sent off?
curious how long until they're ready to ship. . .
also, can i get this in purple? lol, curious if you are just sending them different materials.
but are these already made in CAD or something so that they just have to be sent off?
curious how long until they're ready to ship. . .
also, can i get this in purple? lol, curious if you are just sending them different materials.
Red will be free of charge, if you want purple it'll be an extra $50 if you really want it. They prefer to do them all red though, it'll covered by the rear seat so you won't ever really see it, TTC does red just because it takes good pictures.
Regards,
Kevin
Trending Topics
#8
...i have no back seat, or the cover for that hanger spot either
I'd love to be able to go this route, but I can't justify this price just yet, and probably not by the deadline. . .
it is possible to get ahold of the cad drawings?
i'm curious how this is done for the SC, as the top does not serve as the feed area, so a dual pump hanger may be just that...no advantage for the lines?
I'd love to be able to go this route, but I can't justify this price just yet, and probably not by the deadline. . .
it is possible to get ahold of the cad drawings?
i'm curious how this is done for the SC, as the top does not serve as the feed area, so a dual pump hanger may be just that...no advantage for the lines?
#9
...i have no back seat, or the cover for that hanger spot either
I'd love to be able to go this route, but I can't justify this price just yet, and probably not by the deadline. . .
it is possible to get ahold of the cad drawings?
i'm curious how this is done for the SC, as the top does not serve as the feed area, so a dual pump hanger may be just that...no advantage for the lines?
I'd love to be able to go this route, but I can't justify this price just yet, and probably not by the deadline. . .
it is possible to get ahold of the cad drawings?
i'm curious how this is done for the SC, as the top does not serve as the feed area, so a dual pump hanger may be just that...no advantage for the lines?
Not possible to get the cad drawings, sorry.
#12
Bump, come on guys! Trying to support an item you guys have been asking for forever, 3 pre-orders won't cut putting it into production. If we want this to happen I would like to see a minimum of 10 orders.. 25 was the goal but obviously not going to happen.