" ** GB IS250/350, GS 98-05, LS400 & SC430 TunedParts Billet rear Member Braces ** "
#31
Lexus Champion
iTrader: (4)
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
Luis, how about making them for the SC?
Ryan
Ryan
Hello CL members,
Today I am happy to be able to offer you these TunedParts solid billet aluminum, black powder coated rear member reinforcement braces.
These are completely powder coated to help protect against the elements like road grime an salt. Over time they can cause pits in unprotected billet.
These will help eliminate wheel hop, and increase the overall performance feel of your Lexus.
These bars fit the following model years
IS300 05/2000- 2005
GS300 08/1995-07/1997
LS400 10/1994-08/2000
We will be offering these on GB at $99.00 shipped (LOWER 48 STATES)
Please use GB code GBBARS
Order HERE
Here are some pics of the bars,
![](http://www.l-tunedparts.com/photos/2486/0.dat?1176395957)
![](http://www.l-tunedparts.com/photos/2486/2.dat?1176396004)
![](http://www.l-tunedparts.com/photos/2486/3.dat?1176396016)
Today I am happy to be able to offer you these TunedParts solid billet aluminum, black powder coated rear member reinforcement braces.
These are completely powder coated to help protect against the elements like road grime an salt. Over time they can cause pits in unprotected billet.
These will help eliminate wheel hop, and increase the overall performance feel of your Lexus.
These bars fit the following model years
IS300 05/2000- 2005
GS300 08/1995-07/1997
LS400 10/1994-08/2000
We will be offering these on GB at $99.00 shipped (LOWER 48 STATES)
Please use GB code GBBARS
Order HERE
Here are some pics of the bars,
#32
Pole Position
Join Date: Jun 2001
Location: SAN JOSE CA
Posts: 354
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
I have been tossing that around...
It's all about the interest being there.
When the GS gen2 is done I will see If carson would like to post an interest thread up like the GSGEN2 thread....
Anyone have any pics of the axle area under a SC?
D
It's all about the interest being there.
When the GS gen2 is done I will see If carson would like to post an interest thread up like the GSGEN2 thread....
Anyone have any pics of the axle area under a SC?
D
#33
Original CL Sponsor since 1999
Thread Starter
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
Ok guys, GB has been updated, we now have the bars listed for the second gen GS as well as the 3rd gen IS and GS, and the SC430 . We will get the bars in about 2-3 weeks, and we will still be 99.00 shipped lower 48 states.
![Smilie](https://www.clublexus.com/forums/images/smilies/smile.gif)
#37
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
[QUOTE]Yes, it replaces a stock stamped steal piece on the rear subframe... i dont think it will interfere with the other braces.. but i dont know for 100% on that...[QUOTE]
Thanks for the clarification...just want to make sure it will not interfere with the RLCB before I pull the trigger!
Thanks,
DJC
Thanks for the clarification...just want to make sure it will not interfere with the RLCB before I pull the trigger!
Thanks,
DJC
#41
Pole Position
Join Date: Jun 2001
Location: SAN JOSE CA
Posts: 354
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
To answer some questions
If you have the toms then no need for the Tunedparts bars. These were made for the people who didn't want to spend 400 on the toms bars and wanted to replace some items.
These have been made to clear the exhaust hangers for the GS models and there is plenty of room. Kept our design in spec with the car in mind.
thanks
D
If you have the toms then no need for the Tunedparts bars. These were made for the people who didn't want to spend 400 on the toms bars and wanted to replace some items.
These have been made to clear the exhaust hangers for the GS models and there is plenty of room. Kept our design in spec with the car in mind.
thanks
D
#42
![Question](https://www.clublexus.com/forums/images/icons/icon5.gif)
I have a 2001 GS430. I do not have the Tom's 6 links, but I do have the Tom's style lower rear chassis brace. The lower rear chassis brace is square in shape and mounts in four locations. Will these billet bars work with my Tom's lower rear chassis brace?
Thanks,
DJC
Thanks,
DJC