Nigel JDM Parts **LED Board for your Interior & Exterior**
11-20-08, 01:45 PM
#91
To everyone who has ordered in this few days (yesterday and today), the led board are currently OUT OF STOCK.
Will restock next week!
I will also send you guy an email to make sure you know that.
Again, I am sorry for the inconvinance.
thanks
Nigel
Will restock next week!
I will also send you guy an email to make sure you know that.
Again, I am sorry for the inconvinance.
thanks
Nigel
11-20-08, 05:02 PM
#92
Rookie
Join Date: May 2006
Location: CA
Posts: 54
Likes: 0
Received 0 Likes
on
0 Posts
Placed an order for 6 boards. Nigel forgot to note color as white please make a note of that when you ship them out once you stock is replenished.
Let me know if you got the order.
Let me know if you got the order.
11-21-08, 06:53 PM
#95
Driver
Join Date: Aug 2008
Location: Northern Westchester, NY
Posts: 132
Likes: 0
Received 1 Like
on
1 Post
Quote: Originally Posted by LW ES300...Kick A$$ service Nigel. I ordered last Saturday and they managed to fly across the country to NY & were in my mailbox @ noon Tuesday (yesterday). Awesome mail/freight! Thanks
let us know if it works and how do you like it
Worked out great for the dome light (just behind driver/passenger headrests) and it was very simple to do. Didn't take a picture after the install of the LED board because it would not show a fair image of the brightness. It did fit in a 96 ES300 no problem, but it will not fit the floodlights on the doors. They may fit the personal light up front by the reaview mirror, but it was too damn cold & windy out to do that.
let us know if it works and how do you like it
Worked out great for the dome light (just behind driver/passenger headrests) and it was very simple to do. Didn't take a picture after the install of the LED board because it would not show a fair image of the brightness. It did fit in a 96 ES300 no problem, but it will not fit the floodlights on the doors. They may fit the personal light up front by the reaview mirror, but it was too damn cold & windy out to do that.
11-22-08, 01:37 AM
#96
will restock next week
thanks for the heads up!
Quote: Originally Posted by LW ES300...Kick A$$ service Nigel. I ordered last Saturday and they managed to fly across the country to NY & were in my mailbox @ noon Tuesday (yesterday). Awesome mail/freight! Thanks
let us know if it works and how do you like it
Worked out great for the dome light (just behind driver/passenger headrests) and it was very simple to do. Didn't take a picture after the install of the LED board because it would not show a fair image of the brightness. It did fit in a 96 ES300 no problem, but it will not fit the floodlights on the doors. They may fit the personal light up front by the reaview mirror, but it was too damn cold & windy out to do that.
let us know if it works and how do you like it
Worked out great for the dome light (just behind driver/passenger headrests) and it was very simple to do. Didn't take a picture after the install of the LED board because it would not show a fair image of the brightness. It did fit in a 96 ES300 no problem, but it will not fit the floodlights on the doors. They may fit the personal light up front by the reaview mirror, but it was too damn cold & windy out to do that.
11-22-08, 06:52 PM
#97
Driver
Join Date: Aug 2008
Location: Northern Westchester, NY
Posts: 132
Likes: 0
Received 1 Like
on
1 Post
Hey Nigel - Do you have anything for fog lights? Specifically, I'm looking for replacement bulbs for the fog lights that can connect to the factory setup and I'd like the color to stay white (not yellow or blue). Something like this: Xenon HID Fog H3 Light Bulbs. Let me know what you may have to offer for a 96 ES300. Thanks!
11-22-08, 07:16 PM
#98
Hey Nigel - Do you have anything for fog lights? Specifically, I'm looking for replacement bulbs for the fog lights that can connect to the factory setup and I'd like the color to stay white (not yellow or blue). Something like this: Xenon HID Fog H3 Light Bulbs. Let me know what you may have to offer for a 96 ES300. Thanks!
But the orginal H3 light bulb is a small one.
The one that I am using is the regular H3 light bulb.
You have to modify it, such as remove the back cover of the fog light to fit the regular H3 light bulb and put some tape to make sure it doesnt move.
So far no problem on my car.
11-22-08, 10:25 PM
#99
Driver
Join Date: Aug 2008
Location: Northern Westchester, NY
Posts: 132
Likes: 0
Received 1 Like
on
1 Post
[QUOTE=nigelchow;4027833]I have a 2000 ES300 and I have HID Fog Light for that car. But the orginal H3 light bulb is a small one. The one that I am using is the regular H3 light bulb.QUOTE]
Yeah, that's what I put in back in January (plug & play and fit right into the factory setup), but one of them blew tonight. Do you sell these H3 HID bulbs? I bought one pair for like $5.50 or $6.50 + freight 10 months ago, but now I can't find that guy's listing on eBay. Thanks
Yeah, that's what I put in back in January (plug & play and fit right into the factory setup), but one of them blew tonight. Do you sell these H3 HID bulbs? I bought one pair for like $5.50 or $6.50 + freight 10 months ago, but now I can't find that guy's listing on eBay. Thanks
Last edited by LW ES300; 11-22-08 at 10:29 PM.
11-23-08, 09:45 AM
#100
Pole Position
iTrader: (10)
Join Date: Aug 2006
Location: Connecticut & NYC
Posts: 319
Likes: 0
Received 0 Likes
on
0 Posts
how are you guys fitting these into the front dome lights on a 2IS? i dont think its possible to get them in through the back after removing the whole unit, and i cant figure out how to take the lens itself out. can someone share how they got them into the front dome light?
11-23-08, 10:23 PM
#101
i have three boards in my front dome light. just do what i did. take a screw driver with a flat head, hold the door light button down, carefully stick the screwdriver between the button and the cover. then just carefully pop it off. it should pop off, then just connect the boards. the center light is a tight fit, but if you tuck the wires properly, it should fit fine.
11-24-08, 03:55 PM
#102
i have three boards in my front dome light. just do what i did. take a screw driver with a flat head, hold the door light button down, carefully stick the screwdriver between the button and the cover. then just carefully pop it off. it should pop off, then just connect the boards. the center light is a tight fit, but if you tuck the wires properly, it should fit fine.
Hopefully, they can arrive before the thanksgiving holiday.
11-26-08, 08:51 AM
#104
Driver
Join Date: Aug 2008
Location: Northern Westchester, NY
Posts: 132
Likes: 0
Received 1 Like
on
1 Post
Dated 11/22/08, 10:16 PM
will restock next week
__________________
Nigel-JDM Parts.
www.nigel-jdmparts.com
will restock next week
__________________
Nigel-JDM Parts.
www.nigel-jdmparts.com
Nigel
I just ordered another board. You're sending to zip 10526 in NY. Thanks
I just ordered another board. You're sending to zip 10526 in NY. Thanks
Hey Nigel, when will you have inventory and be able to ship product? Thanks