WORK Wheels Introduction on Club Lexus! Any questions or information let us know!
#61
Former Sponsor
Thread Starter
Join Date: Jun 2009
Location: CA
Posts: 71
Likes: 0
Received 0 Likes
on
0 Posts
Here are some new pics we received of a Lexus GS on the newly released WORK Schwert SC5:
The wheels shown are in Gunmetal Polish 2 (GMP2) Finish with Step Rim. Other finishes include Crystal Silver (CS), Feinheit Silver Polish (FSP), WORK Black Chrome (WBC), and other special finishes
Sizing comes in 19" + 20" Full Reverse Rim (flat lip). The 20" + 21" comes in Step Rim.
For more information on the WORK Schwert SC5, please click here.
Wheel shown above is Feinheit Silver Polish (FSP) Finish.
To get pricing on the wheel, please feel free to contact any one of our WORK Authorized Dealers.
The wheels shown are in Gunmetal Polish 2 (GMP2) Finish with Step Rim. Other finishes include Crystal Silver (CS), Feinheit Silver Polish (FSP), WORK Black Chrome (WBC), and other special finishes
Sizing comes in 19" + 20" Full Reverse Rim (flat lip). The 20" + 21" comes in Step Rim.
For more information on the WORK Schwert SC5, please click here.
Wheel shown above is Feinheit Silver Polish (FSP) Finish.
To get pricing on the wheel, please feel free to contact any one of our WORK Authorized Dealers.
Last edited by WORKWheels; 10-30-09 at 12:47 PM.
#62
Former Sponsor
Thread Starter
Join Date: Jun 2009
Location: CA
Posts: 71
Likes: 0
Received 0 Likes
on
0 Posts
Congratulations to David Huang for being awarded the 2009 SEMA Showcase Winner by Lexus!
Lexus asked owners from across the nation to submit their customized Lexus vehicles, with the prize being a display spot at the Lexus booth @ SEMA.
David's $100K+ customized IS300 took first place using a set of WORK VS-XX wheels in Chrome (M) Finish.
For more information on his contest winning IS300, please visit the SEMA section on the Lexus website.
Photos were taken by Anthony Mair and released by Lexus Motor Group.
#64
Questions regarding SC1.
1. Does it come with 19 inch 8.5 and 9.5 width for step lip/rim? The one I saw in the Japanese Work catalogue doesn't offer with those sizes.
2. Are the offsets customizable?
Thanks
1. Does it come with 19 inch 8.5 and 9.5 width for step lip/rim? The one I saw in the Japanese Work catalogue doesn't offer with those sizes.
2. Are the offsets customizable?
Thanks
#65
Former Sponsor
Thread Starter
Join Date: Jun 2009
Location: CA
Posts: 71
Likes: 0
Received 0 Likes
on
0 Posts
I feel like I had come across that info but can't seem to find it at the moment
If I can find out I'll let you know
Sorry guys for not replying sooner, yikes, didn't realize people had posted in the thread
Anyhow here are the answers to your questions:
1. WORK Schwert SC1 in Step Rim is available in the following widths:
19x9.0
19x9.5
19x10.0
19x10.5
For Full Reverse Rim (flat lip), you can get 19x7.5 through 19x11.0 in half size increments (i.e 19x7.5, 19x8.0, 19x8.5...19x10.5, 19x11.0)
You can view the WORK Schwert SC2 Sizing Chart here.
2. Yes, the offsets are customizable within the ranges given for the specific sizing and disk you choose
Let's take for instance the WORK Schwert SC2 as referenced above
If you open the sizing chart and go to 19" Step Rim and look at 19x9.0....under the Big Caliper Disk (R Disk), the offset range is a +36 ~ -34
This means you can choose any offset within 1mm increments in that range (i.e +36, +35, +34....-32, -33, -34)
Hope that helps, feel free to PM me with any questions
On a side note, WORK Wheels just released their latest series of wheels, the VS Concept series, which pulls influence from past VS series while also innovating new styles for 2010
You can view the WORK VS Concept lineup by clicking here
To get pricing and for questions on your options, please contact one of our many WORK Authorized Dealers
If I can find out I'll let you know
Anyhow here are the answers to your questions:
1. WORK Schwert SC1 in Step Rim is available in the following widths:
19x9.0
19x9.5
19x10.0
19x10.5
For Full Reverse Rim (flat lip), you can get 19x7.5 through 19x11.0 in half size increments (i.e 19x7.5, 19x8.0, 19x8.5...19x10.5, 19x11.0)
You can view the WORK Schwert SC2 Sizing Chart here.
2. Yes, the offsets are customizable within the ranges given for the specific sizing and disk you choose
Let's take for instance the WORK Schwert SC2 as referenced above
If you open the sizing chart and go to 19" Step Rim and look at 19x9.0....under the Big Caliper Disk (R Disk), the offset range is a +36 ~ -34
This means you can choose any offset within 1mm increments in that range (i.e +36, +35, +34....-32, -33, -34)
Hope that helps, feel free to PM me with any questions
On a side note, WORK Wheels just released their latest series of wheels, the VS Concept series, which pulls influence from past VS series while also innovating new styles for 2010
You can view the WORK VS Concept lineup by clicking here
To get pricing and for questions on your options, please contact one of our many WORK Authorized Dealers
#66
executive matchup
the kit is job design (see link for comparison: http://www.jobdesign.co.jp/photo/thu....php?album=196)
i love my SC2! work FTW!
i love my SC2! work FTW!
Last edited by Stormforge; 02-10-10 at 08:32 PM.
#68
Former Sponsor
Thread Starter
Join Date: Jun 2009
Location: CA
Posts: 71
Likes: 0
Received 0 Likes
on
0 Posts
the kit is job design (see link for comparison: http://www.jobdesign.co.jp/photo/thu....php?album=196)
I love the WORK Schwert SC2's you got....that color combo works real well!
I think it's actually the same car (Job Design), just with different wheels:
http://www.jobdesign.co.jp/photo/dis...lbum=167&pos=0
A huge majority of Job Design cars have WORK Wheels
#71
Former Sponsor
Thread Starter
Join Date: Jun 2009
Location: CA
Posts: 71
Likes: 0
Received 0 Likes
on
0 Posts
Correct, they make three different caps for the WORK Schwert series
Colors available are Black / Red / Blue
At the time of order, you can specify what cap color you want, with no extra charge
If you would like to purchase them separately you can do so at our online store WORK Wheels Online
You would want to contact any one of our WORK Authorized Dealers
Many of them are sponsors to this forum, such as Ravspec above
Support the vendors who take their time to support this forum
#75
Former Sponsor
Thread Starter
Join Date: Jun 2009
Location: CA
Posts: 71
Likes: 0
Received 0 Likes
on
0 Posts
No the WORK VS-XX didn't come in Step Rim
Only Full Reverse Rim (straight lip)
Yes, replacement barrels are available for the modular 3 piece wheels, such as the WORK VS-XX, VS-FX, and Meister S1 3P
Yes, the VS-XX comes in a huge variety of sizing, here is the sizing chart:
http://www.workwheelsusa.com/media/w...5/VSXX_PDF.pdf
I'm not sure what "look" you are going for (i.e an aggressive or conservative setup), but the safe fitment for that car is something like a 7.5 or 8.0 all around, with a +40-ish offset all around
As far as disk face goes, if 18" VS-XX, you could run an O Disk all the way around
If 19" / 20" VS-XX, you should run an A Disk front & O Disk rear
But with a quick search on here, I found a user "alleykat" with an aggressive setup on a ES300:
https://www.clublexus.com/forums/es3...n-finally.html
Sizing is an 18x8.5 +25 all around, and would require some fender rolling, etc
Do some research on what fitment would suit you best and any questions feel free to PM me
Only Full Reverse Rim (straight lip)
http://www.workwheelsusa.com/media/w...5/VSXX_PDF.pdf
I'm not sure what "look" you are going for (i.e an aggressive or conservative setup), but the safe fitment for that car is something like a 7.5 or 8.0 all around, with a +40-ish offset all around
As far as disk face goes, if 18" VS-XX, you could run an O Disk all the way around
If 19" / 20" VS-XX, you should run an A Disk front & O Disk rear
But with a quick search on here, I found a user "alleykat" with an aggressive setup on a ES300:
https://www.clublexus.com/forums/es3...n-finally.html
Sizing is an 18x8.5 +25 all around, and would require some fender rolling, etc
Do some research on what fitment would suit you best and any questions feel free to PM me