Brinkmann Maxfire Dual Xenon Rechargeable Spotlight At ProperAutoCare.com
#1
Lexus Test Driver
Thread Starter
Join Date: Nov 2009
Location: FLORIDA
Posts: 953
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
The Brinkmann Maxfire Dual Xenon Rechargeable Spotlight is used by many detailing pros as well as enthusiasts that are after that perfect paint finish. The Brinkmann Maxfire Dual Xenon Rechargeable Spotlight is lightweight, and compact enough to go along with you where ever your detailing job might be. From your garage to a mobile detailing service, this Brinkmann Rechargeable Spotlight is just the tool you need to get the perfect paint reflection.
The Brinkmann Maxfire Dual Xenon Rechargeable Spotlight has two Xenon bulbs and a Ni-Cd rechargeable battery. It can be charged using the A/C wall plug, or car cigarette lighter plug, both are included. The spotlight can be used in single beam or dual beam mode.
Switching Between Single and Dual Beams:
Step 1: For single beam, slide switch on back of light to one dot, as illustrated.
Step 2: For dual beam, slide switch on back of light to two dots, as illustrated.
NOTE: The Dual Xenon will burn for approximately 40 minutes if using both beams, or approximately 85 minutes if using only one beam.
Continuous Beam Using Lock Button:
Step 1: For a continuous beam, depress trigger switch and slide the lock button to the LOCKED position.
Step 2: To unlock and turn spotlight OFF, slide the lock button to the UNLOCKED position.
WARNING: Always turn spotlight off when not in use.
What's Included:
![](http://i159.photobucket.com/albums/t158/zoomzoommazda5/800-2222-0-1.gif)
1 Dual Xenon spotlight
2 120-volt AC charger
3 12-volt DC charger/adapter lighter plug
Owner’s Manual
The Brinkmann Maxfire Dual Xenon Rechargeable Spotlight has two Xenon bulbs and a Ni-Cd rechargeable battery. It can be charged using the A/C wall plug, or car cigarette lighter plug, both are included. The spotlight can be used in single beam or dual beam mode.
![](http://i159.photobucket.com/albums/t158/zoomzoommazda5/classic-motoring_2094_8217415.gif)
Switching Between Single and Dual Beams:
Step 1: For single beam, slide switch on back of light to one dot, as illustrated.
Step 2: For dual beam, slide switch on back of light to two dots, as illustrated.
NOTE: The Dual Xenon will burn for approximately 40 minutes if using both beams, or approximately 85 minutes if using only one beam.
Continuous Beam Using Lock Button:
Step 1: For a continuous beam, depress trigger switch and slide the lock button to the LOCKED position.
Step 2: To unlock and turn spotlight OFF, slide the lock button to the UNLOCKED position.
WARNING: Always turn spotlight off when not in use.
What's Included:
![](http://i159.photobucket.com/albums/t158/zoomzoommazda5/800-2222-0-1.gif)
1 Dual Xenon spotlight
2 120-volt AC charger
3 12-volt DC charger/adapter lighter plug
Owner’s Manual
Thread
Thread Starter
Forum
Replies
Last Post