** Carson Tuned Poly Urethane Bushings ** 98-05 GS **
#1
Original CL Sponsor since 1999
Thread Starter
** Carson Tuned Poly Urethane Bushings ** 98-05 GS + 01-05 IS300 **
Hey guys,
This GB is for the 2nd gen GS guys and the IS300 guys. Its a few maintance items that got so many PM's that we got our poly-urethane supplier to make them just for CL.
New from Carson Toyota for your 98-05 GS . With this bushing kit you no longer have to replace a rack and pinion just because the original pressed in bushings have gone bad.
Kit includes the 2 mounting bushing and the support bushing. Full polyurethane construction
98-05 GS Rack & Pinion Bushing Kit
$45.00 Shipped (lower 48 states)
Use Code GSPOLY
Order HERE
For the 98-05 GS Front Lower control arm #2 (please see picture below)
Full poly urethane replacement, no need to replace the entire control arm when the you can just have a better, longer lasting bushing installed.
** Price is for one bushing for one arm **
$45.00 Shipped (lower 48 states)
Use Code GSPOLY
Order HERE
For the 98-05 GS and 01-05 IS300 Rear Axle Carrier Bushing (please see picture below)
Full poly urethane replacement, no need to replace the entire knuckle when the you can just have a better, longer lasting bushing installed.
** Price is for one bushing for one arm **
$45.00 Shipped (lower 48 states)
Use Code GSPOLY
Order HERE
For the 01-05 IS300 Front Strut Rod Bushing (please see picture below)
Full poly urethane replacement, no need to replace the entire strut rod when the you can just have a better, longer lasting bushing installed.
** Price is for one bushing for one arm **
$47.00 Shipped (lower 48 states)
Use Code GSPOLY
Order HERE
**As always if you have any questions please feel free to call or email anytime
Luis S
310-522-2383 **
This GB is for the 2nd gen GS guys and the IS300 guys. Its a few maintance items that got so many PM's that we got our poly-urethane supplier to make them just for CL.
New from Carson Toyota for your 98-05 GS . With this bushing kit you no longer have to replace a rack and pinion just because the original pressed in bushings have gone bad.
Kit includes the 2 mounting bushing and the support bushing. Full polyurethane construction
98-05 GS Rack & Pinion Bushing Kit
$45.00 Shipped (lower 48 states)
Use Code GSPOLY
Order HERE
For the 98-05 GS Front Lower control arm #2 (please see picture below)
Full poly urethane replacement, no need to replace the entire control arm when the you can just have a better, longer lasting bushing installed.
** Price is for one bushing for one arm **
$45.00 Shipped (lower 48 states)
Use Code GSPOLY
Order HERE
For the 98-05 GS and 01-05 IS300 Rear Axle Carrier Bushing (please see picture below)
Full poly urethane replacement, no need to replace the entire knuckle when the you can just have a better, longer lasting bushing installed.
** Price is for one bushing for one arm **
$45.00 Shipped (lower 48 states)
Use Code GSPOLY
Order HERE
For the 01-05 IS300 Front Strut Rod Bushing (please see picture below)
Full poly urethane replacement, no need to replace the entire strut rod when the you can just have a better, longer lasting bushing installed.
** Price is for one bushing for one arm **
$47.00 Shipped (lower 48 states)
Use Code GSPOLY
Order HERE
**As always if you have any questions please feel free to call or email anytime
Luis S
310-522-2383 **
Last edited by Carson-Lex; 03-29-11 at 03:08 PM.
#2
Lexus Champion
Hey guys,
This GB is for the 2nd gen GS guys. Its a few maintance items that got so many PM's that we got our poly-urathane supplier to make them just for CL.
New from Carson Toyota for your 98-05 GS . With this bushing kit you no longer have to replace a rack and pinion just because the original pressed in bushings have gone bad.
Kit includes the 2 mounting bushing and the support bushing. Full polyurathane construction
98-05 GS Rack & Pinion Bushing Kit
$45.00 Shipped (lower 48 states)
Use Code GSPOLY
Order HERE
For the 98-05 GS Front Lower control arm #2 (please see picture below)
Full poly urathane replacement, no need to replace the entire control arm when the you can just have a better, longer lasting bushing installed.
** Price is for one bushing for one arm **
$45.00 Shipped (lower 48 states)
Use Code GSPOLY
Order HERE
**As always if you have any questions please feel free to call or email anytime
Luis S
310-522-2383 **
This GB is for the 2nd gen GS guys. Its a few maintance items that got so many PM's that we got our poly-urathane supplier to make them just for CL.
New from Carson Toyota for your 98-05 GS . With this bushing kit you no longer have to replace a rack and pinion just because the original pressed in bushings have gone bad.
Kit includes the 2 mounting bushing and the support bushing. Full polyurathane construction
98-05 GS Rack & Pinion Bushing Kit
$45.00 Shipped (lower 48 states)
Use Code GSPOLY
Order HERE
For the 98-05 GS Front Lower control arm #2 (please see picture below)
Full poly urathane replacement, no need to replace the entire control arm when the you can just have a better, longer lasting bushing installed.
** Price is for one bushing for one arm **
$45.00 Shipped (lower 48 states)
Use Code GSPOLY
Order HERE
**As always if you have any questions please feel free to call or email anytime
Luis S
310-522-2383 **
very nice, im in need for the control arm #2 bushings, do we need to state what year GS we have? from what i remember, the 98-99 bushings are smaller than 00-05 ones.
#5
Original CL Sponsor since 1999
Thread Starter
You know I would expect the noise from most any poly bushing, but the truth is that in the time that we have been sellig these, and not just for thr GS but for the LS and SC, I have not received any compaints about excessive noice. I would still suggest for any poly bushing that you keep up with a regular schedule for making sure they are greased properly.
#6
Lexus Fanatic
iTrader: (1)
These are the steering rack and caster bushings. There is only side to side force acting on them, there's no rotational force like on the lower/upper control arm bushings where they move with the suspension. There's no way these bushings will make noise because all they do is hold a part stationary. Nothing is rubbing or rotating against the bushing.
Trending Topics
#9
Original CL Sponsor since 1999
Thread Starter
#13
Original CL Sponsor since 1999
Thread Starter
#14
i didnt do the group buy off here but i got them off your site but these are very low quality there are bubbles through out the cast of the bushing and there not complete just the bushing no center pin by the way i am talking of the caster arm bushing or arm #2 what ever i do not want to use these i will be returning these. we need a solution that will last not just put a bandaid on the problem. the way these bushings are they wont last three months before they split too all the bubbles in the cast make the bushing weak. i would not suggest these bushings to anyone looking and a permant fix this wont be it...and i know carson lexus does not make them so its not on them but i would say i exspected better quality from a lexus dealer.
#15
Hey guys,
This GB is for the 2nd gen GS guys and the IS300 guys. Its a few maintance items that got so many PM's that we got our poly-urethane supplier to make them just for CL.
New from Carson Toyota for your 98-05 GS . With this bushing kit you no longer have to replace a rack and pinion just because the original pressed in bushings have gone bad.
Kit includes the 2 mounting bushing and the support bushing. Full polyurethane construction
98-05 GS Rack & Pinion Bushing Kit
$45.00 Shipped (lower 48 states)
Use Code GSPOLY
Order HERE
For the 98-05 GS Front Lower control arm #2 (please see picture below)
Full poly urethane replacement, no need to replace the entire control arm when the you can just have a better, longer lasting bushing installed.
** Price is for one bushing for one arm **
$45.00 Shipped (lower 48 states)
Use Code GSPOLY
Order HERE
For the 98-05 GS and 01-05 IS300 Rear Axle Carrier Bushing (please see picture below)
Full poly urethane replacement, no need to replace the entire knuckle when the you can just have a better, longer lasting bushing installed.
** Price is for one bushing for one arm **
$45.00 Shipped (lower 48 states)
Use Code GSPOLY
Order HERE
For the 01-05 IS300 Front Strut Rod Bushing (please see picture below)
Full poly urethane replacement, no need to replace the entire strut rod when the you can just have a better, longer lasting bushing installed.
** Price is for one bushing for one arm **
$47.00 Shipped (lower 48 states)
Use Code GSPOLY
Order HERE
**As always if you have any questions please feel free to call or email anytime
Luis S
310-522-2383 **
This GB is for the 2nd gen GS guys and the IS300 guys. Its a few maintance items that got so many PM's that we got our poly-urethane supplier to make them just for CL.
New from Carson Toyota for your 98-05 GS . With this bushing kit you no longer have to replace a rack and pinion just because the original pressed in bushings have gone bad.
Kit includes the 2 mounting bushing and the support bushing. Full polyurethane construction
98-05 GS Rack & Pinion Bushing Kit
$45.00 Shipped (lower 48 states)
Use Code GSPOLY
Order HERE
For the 98-05 GS Front Lower control arm #2 (please see picture below)
Full poly urethane replacement, no need to replace the entire control arm when the you can just have a better, longer lasting bushing installed.
** Price is for one bushing for one arm **
$45.00 Shipped (lower 48 states)
Use Code GSPOLY
Order HERE
For the 98-05 GS and 01-05 IS300 Rear Axle Carrier Bushing (please see picture below)
Full poly urethane replacement, no need to replace the entire knuckle when the you can just have a better, longer lasting bushing installed.
** Price is for one bushing for one arm **
$45.00 Shipped (lower 48 states)
Use Code GSPOLY
Order HERE
For the 01-05 IS300 Front Strut Rod Bushing (please see picture below)
Full poly urethane replacement, no need to replace the entire strut rod when the you can just have a better, longer lasting bushing installed.
** Price is for one bushing for one arm **
$47.00 Shipped (lower 48 states)
Use Code GSPOLY
Order HERE
**As always if you have any questions please feel free to call or email anytime
Luis S
310-522-2383 **