PPE HEADERS for SC, LS and GS new design GB!
#317
Driver
iTrader: (6)
Join Date: Feb 2009
Location: ca
Posts: 183
Likes: 0
Received 0 Likes
on
0 Posts
That's really close to the steering shaft. All this time I thought PPE would had at least one GS to test before they finalized the final set of headers. Hopefully with the removal of the heat shield my 01 gs430 will be fine. Neegroy, when u have time plz post some pics so I know what to expect. Thanks
#318
I unboxed my headers today and I couldn't find a dimple thats supposedly there for the steering shaft its on the divert side header right? also I'm missing a 10mm bolt listed in the packing list. Did I get sent the wrong headers? Its for a 430
#319
Sponsor
iTrader: (4)
That's really close to the steering shaft. All this time I thought PPE would had at least one GS to test before they finalized the final set of headers. Hopefully with the removal of the heat shield my 01 gs430 will be fine. Neegroy, when u have time plz post some pics so I know what to expect. Thanks
#320
Sponsor
iTrader: (4)
#321
Sponsor
iTrader: (4)
Yes i am aware of that now, but the only thing is im worried that if i remove the shield, the shaft itself might seize. and from the looks of the amount of 'play" (or scratch marks on the headers) it needs alot for it completely clear. vertically i believe i need at least 2-3 inches.
#322
here is a picture of the drivers side header.
also is the exhaust tubes supposed to be different length between left and right sides? Cuz the first tube or the longest tube on the driver side is longer than the passenger side so it sticks out more compared to the passenger side, is this normal? since in your pics the exhaust tube lengths seem to be equal on both sides.
#323
Sponsor
iTrader: (4)
here is a picture of the drivers side header.
also is the exhaust tubes supposed to be different length between left and right sides? Cuz the first tube or the longest tube on the driver side is longer than the passenger side so it sticks out more compared to the passenger side, is this normal? since in your pics the exhaust tube lengths seem to be equal on both sides.
also is the exhaust tubes supposed to be different length between left and right sides? Cuz the first tube or the longest tube on the driver side is longer than the passenger side so it sticks out more compared to the passenger side, is this normal? since in your pics the exhaust tube lengths seem to be equal on both sides.
Also, I sent you a PM.
#324
Driver
iTrader: (6)
Join Date: Feb 2009
Location: ca
Posts: 183
Likes: 0
Received 0 Likes
on
0 Posts
Headers clarification
PPE, thank you very much for the quick response and for the clarification. I'm planning to install mine next week and will follow your advice and remove the heat shield.
QUOTE=PPEHeaders;7607034]We have had multiple GS430s in here as well as SC430s (both headers are the same). The heatshield has always come off during install since the latest update last year. We added the dimple for additional clearance. We sold 10 of these models this year before this GB and they installed OK. There is clearance when the little heatshield is removed from the knuckle. You don't have to worry about removing it, it will not cause any issues.[/QUOTE]
QUOTE=PPEHeaders;7607034]We have had multiple GS430s in here as well as SC430s (both headers are the same). The heatshield has always come off during install since the latest update last year. We added the dimple for additional clearance. We sold 10 of these models this year before this GB and they installed OK. There is clearance when the little heatshield is removed from the knuckle. You don't have to worry about removing it, it will not cause any issues.[/QUOTE]
#325
Thanks for the questions guys, if there are any other concerns please post them up.
Mike
Mike
__________________
Redefining Lexus Aftermarket Parts Since 2001
-- We are your Lexus suspension experts--
BCR - KW - PENSKE - OHLINS - HKS - GREDDY - STANCEPARTS
Links - Arms - SuperPro Poly Bushings - Solid Bearing Conversions - Motor Mounts
RB BBK's and 2P Rotors, G-Loc pads, Radium Fuel Systems
Custom Fabrication Design and Machining - Industrial 3D Printing - Laser Cutting
2018 USTCC Sportsman Class Champions - 2018 NASA ST5 National Champions
Redefining Lexus Aftermarket Parts Since 2001
-- We are your Lexus suspension experts--
BCR - KW - PENSKE - OHLINS - HKS - GREDDY - STANCEPARTS
Links - Arms - SuperPro Poly Bushings - Solid Bearing Conversions - Motor Mounts
RB BBK's and 2P Rotors, G-Loc pads, Radium Fuel Systems
Custom Fabrication Design and Machining - Industrial 3D Printing - Laser Cutting
2018 USTCC Sportsman Class Champions - 2018 NASA ST5 National Champions
#328
Lexus Champion
iTrader: (9)
Join Date: Jan 2004
Location: NorCal
Posts: 3,947
Likes: 0
Received 0 Likes
on
0 Posts
Sorry, I've been away from this thread. I received two passenger side headers. PPE sent me a cross shipping label to send one of the passenger side headers to Sean French. I'm assuming Sean has a shipping label to send me the driver's side so this gets resolved. Sean, PM me when you get a chance.
Mike (FIGS) and Paul (PPE)...thanks for working to get this resolved quickly.
joe
Mike (FIGS) and Paul (PPE)...thanks for working to get this resolved quickly.
joe
#329
Sorry, I've been away from this thread. I received two passenger side headers. PPE sent me a cross shipping label to send one of the passenger side headers to Sean French. I'm assuming Sean has a shipping label to send me the driver's side so this gets resolved. Sean, PM me when you get a chance.
Mike (FIGS) and Paul (PPE)...thanks for working to get this resolved quickly.
joe
Mike (FIGS) and Paul (PPE)...thanks for working to get this resolved quickly.
joe
__________________
Redefining Lexus Aftermarket Parts Since 2001
-- We are your Lexus suspension experts--
BCR - KW - PENSKE - OHLINS - HKS - GREDDY - STANCEPARTS
Links - Arms - SuperPro Poly Bushings - Solid Bearing Conversions - Motor Mounts
RB BBK's and 2P Rotors, G-Loc pads, Radium Fuel Systems
Custom Fabrication Design and Machining - Industrial 3D Printing - Laser Cutting
2018 USTCC Sportsman Class Champions - 2018 NASA ST5 National Champions
Redefining Lexus Aftermarket Parts Since 2001
-- We are your Lexus suspension experts--
BCR - KW - PENSKE - OHLINS - HKS - GREDDY - STANCEPARTS
Links - Arms - SuperPro Poly Bushings - Solid Bearing Conversions - Motor Mounts
RB BBK's and 2P Rotors, G-Loc pads, Radium Fuel Systems
Custom Fabrication Design and Machining - Industrial 3D Printing - Laser Cutting
2018 USTCC Sportsman Class Champions - 2018 NASA ST5 National Champions