Now through August, the latest HID/LED headlamp upgrades are available to all 2006-2010 2IS (IS250, IS350 & IS-F) owners with a special promotion. IS Owners can upgrade their existing headlamps with the latest LED headlamp found on the latest 2012 model year IS applications.

To purchase, simply follow either link below and choose the option that suits you best and add to cart. At checkout use promotional code XXXXX. Promotional code will allow an additional amount to be subtracted from your total purchase.

 

Turn signal flasher - I've been told there's an issue with the lights blinking to fast. Is this resolved?
Yes. With the LED lights installed your vehicle requires the use of a new flasher. It's nothing more than the flasher found on the 2011-2012 model applications. This allows the turn signals to blink at a normal, more typical frequency.

Where does the flasher install?
The flasher is located at the top of the brake pedal lever - at its pivot point. The flasher is held in place by a single clip with wire connector. Remove the flasher, unplug and install the new flasher.

Another issue, the AFS light. I have been told there is an issue with the AFS light coming on? Has this been resolved?
Yes. We do not consider this be an issue but rather what to expect. The new LED lamps are not equipped with the AFS technology. If your IS is factory equipped with AFS technology you will experience an illuminated AFS light in the lower left corner of the instrument panel. When driving this light will blink. It will blink similar to your seat belt light (but no noise). However, if your IS is not factory equipped with AFS you should not be concerned. No AFS means no AFS light.

Speaking of AFS, how do I know I have this? The AFS feature is found on all HID equipped models. If you have HID, then you have AFS.

I called my local dealership and they state the newer LED lights do not apply to my model. Why does this information contradict yours?
Well this is simple. Each headlamp is modified beforehand using OEM Lexus parts to achieve the desired result. This desired result allows us to achieve a functioning plug and play headlamp option.

Are there installation instructions on how to install the headlamps?
No. We do not provide installation instructions for installing the headlamps. The 'loaded' headlamp option is plug and play so you will need to have previous knowledge for performing an R&R on a headlamp.

Do you offer a trade-in or core exchange for my existing lights?
No. At one time we were allowing headlamps to be returned for credit but no longer. We have entirely too many headlamps for our own good. As much as we would like to help, we cannot take any more.

 

What about the bubble on the new headlight ? are these newer version ? with out issue ?

 

For those of you opting for the 'stripped' version, be absolutely certain the seals are installed properly. There are five (5) primary areas (see below) to which a gasket or o-ring exists that allows the headlamp to be completely sealed. Make certain the proper seal is used when installing the required components to each of your head lamps. This will alleviate any small aquatic habitats from forming inside your lamps.

Lamp Computer with seal located at the bottom of the head lamp


Lamp Cover (for HID bulb) with seal


Wire Harness with seal for LED and seal for turnsignal


Lamp Cover (for bulb) with seal


Darrel

 

The headlamps are the latest lamps as found on the 2012 IS models and/or described in the latest TSiB from Lexus. The bubble issue we believe you may be referring has long since been resolved.

Darrel

 

my 2012 headlights still have bubbles on the paint.

 

.

Well that's great. If there's something we can do to help, consider contacting the staff here.

 

Thanks Sewell, order has been placed. For those needing the turn signal flasher, I called Sewell this morning and got the P/N. This P/N is for the 350 ONLY 8198006020. If you have a 250 it's a different P/N, do not order the one I posted. Thanks again to Club Lexus and Sewell, you guys rock!!!

 

...but you didn't need to purchase the flasher...it's already included. Yes, you have the part number correct, 81980-06020 but again, we include this flasher with the lamps. We've already issued a credit to your account

 

these instock and shipping out? or is there 2 day wait before ship "24-48hour"
cause normally u ship same day if in stock?
lmk im ready send payment when home from work

 

Yes, they're ready for shipping right away.

For our last sale however, we did encounter a few orders that shipped out well beyond that time frame. Of course we did not anticipate the high-demand that caused us all a bit of grief.

 

Thanks, I was unaware that the flasher was included. Thanks for the great customer service!

 

Again really wish I had extra cash.

 

are these the 2011 headlamps or the 2012, from my understanding the 2012 have a whiter led strip also will you guys replace the headlights if the bubbling defect comes up? and does the stripped version come with instructions on installation?

 

As much as Lexus members and Sewell have posted about these lights everyone should know Sewell only sells the 2012 after tsb versions. No more 2011 for sale from Sewell