>>> *BRAND NEW* SPC CAMBER KITS FRONT & REAR IS250/350/F & GS + ES~CT200~SC + More!
#316
Sorry if I missed this already but...
Have you confirmed ball joint fitment on the newer generation IS350? 2014+ models.
Secondly, does the range apply to the stock alignment specs (ex. -0.6 front camber (theoretical stock spec) - 1.5 adjustment (new ball joint) = -2.1 total negative camber available) OR ( ex. +-1.5 degrees is max allowable camber no matter what stock spec is). I assume the first example, but I just want to confirm.
Thank you!
Have you confirmed ball joint fitment on the newer generation IS350? 2014+ models.
Secondly, does the range apply to the stock alignment specs (ex. -0.6 front camber (theoretical stock spec) - 1.5 adjustment (new ball joint) = -2.1 total negative camber available) OR ( ex. +-1.5 degrees is max allowable camber no matter what stock spec is). I assume the first example, but I just want to confirm.
Thank you!
#317
Sorry if I missed this already but...
Have you confirmed ball joint fitment on the newer generation IS350? 2014+ models.
Secondly, does the range apply to the stock alignment specs (ex. -0.6 front camber (theoretical stock spec) - 1.5 adjustment (new ball joint) = -2.1 total negative camber available) OR ( ex. +-1.5 degrees is max allowable camber no matter what stock spec is). I assume the first example, but I just want to confirm.
Thank you!
Have you confirmed ball joint fitment on the newer generation IS350? 2014+ models.
Secondly, does the range apply to the stock alignment specs (ex. -0.6 front camber (theoretical stock spec) - 1.5 adjustment (new ball joint) = -2.1 total negative camber available) OR ( ex. +-1.5 degrees is max allowable camber no matter what stock spec is). I assume the first example, but I just want to confirm.
Thank you!