New Wheels on my CT
#1
New Wheels on my CT
Props to Matt RN for the inspiration, Chris from Fx Autosports in North Hollywood and most importantly thank you to my LOVE!
Last edited by MIKE_RN; 12-26-11 at 06:11 PM.
Trending Topics
#12
jimmyc13, Mike is actually on Road Magnet lowering springs that were on my car for a little bit. He actually cut two full coils off each spring in the front and back to sit where he is now.
He is currently on 18s. I'll leave it up to him to tell you about the specifics of each wheel.
SWAGGGGG.
He is currently on 18s. I'll leave it up to him to tell you about the specifics of each wheel.
SWAGGGGG.
Last edited by Matt_RN; 12-27-11 at 05:07 PM. Reason: Wrong Coil Amount!
#14
Jimmy im using 225x40x18 and 235x40x18 with custom spacers and custom studs. Matt said 1 coil but 2 coils front and back were cut. Im waiting for the Tanabe Coilovers!! Matt please check with Tanabe for me since your CT was the prototype for the R&D.Everything had to be custom because of the offset. It was hitting the brakes. and because the spacers were needed custom studs were used. If your in the LA area, I definetly recommend going to FX Auto in North Hollywood,CA and ONLY talking to Chris. Believe me when I say "ONLY"