Installation of front sway bar
#1
Installation of front sway bar
From my searching I found very little info on this. Is it true that you have to remove the lower control arms and front member brace? Can you sneak it out without affecting alignment?
#5
I followed those same exact instructions.... easy install. its straightforward, no tricks, all simple basic hand tools
you may, need an alignment afterwards. I was lucky, and did not require an alignment
(I have my own means of doing alignments at home, and was still within oem spec)
you may, need an alignment afterwards. I was lucky, and did not require an alignment
(I have my own means of doing alignments at home, and was still within oem spec)
#6
I have not ordered yet, wanted to know how hard the front sway bar is to install. Sounds annoying but reasonably easy. I just hate dealing with LCAs.
Yeah I would not install one bar and not the other.
Yeah I would not install one bar and not the other.
Thread
Thread Starter
Forum
Replies
Last Post
PTYIS2
IS F (2008-2014)
1
05-05-18 01:37 PM