CT 200h Model (2011-2017)

CT 200 h EGR nightmares

Thread Tools
 
Search this Thread
 
Old 06-13-19 | 03:33 PM
  #31  
CTLemon's Avatar
CTLemon
Thread Starter
Driver School Candidate
 
Joined: Apr 2019
Posts: 18
Likes: 0
From: Washington
Default

It is the front crankshaft seal. I have read that it is a good idea to replace the PCV valve at the same time so I'm going ahead with that as well.
Old 06-19-19 | 11:56 PM
  #32  
The Critic's Avatar
The Critic
Driver
 
Joined: Aug 2007
Posts: 53
Likes: 2
From: CA
Default

Originally Posted by CTLemon
It is the front crankshaft seal. I have read that it is a good idea to replace the PCV valve at the same time so I'm going ahead with that as well.
It sounds like the guy who did your HG cut some corners. When I did the HG job on my 2011 Prius, I purchased an engine overhaul gasket kit from Toyota. The part #04111-37315. The kit included every single gasket and seal on the engine....with front and rear crank seals being part of the list.
Old 06-20-19 | 09:27 AM
  #33  
CTLemon's Avatar
CTLemon
Thread Starter
Driver School Candidate
 
Joined: Apr 2019
Posts: 18
Likes: 0
From: Washington
Default

Yes I agree! I’m happy to say that this crank case seal replacement as well as the PCV seems to have fixed my issue finally! Any ideas about TPMS reset or sync because I had my tires replaced and all was good until a few days later when my light came on. The tires do not have any punctures and there is no air loss.

Last edited by CTLemon; 06-22-19 at 01:08 PM.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
pewterss
IS - 2nd Gen (2006-2013)
22
08-27-18 02:32 PM
mydawgz
GS - 3rd Gen (2006-2011)
21
03-01-15 05:21 PM
isam250
IS - 2nd Gen (2006-2013)
3
08-20-12 03:50 PM
03LX470
LX - 3rd Gen (2008-2021)
8
08-18-12 12:01 AM



Quick Reply: CT 200 h EGR nightmares



All times are GMT -7. The time now is 01:46 PM.