Official "MODDED" CT200h picture thread!
#469
Pole Position
Hi Everyone,
I've been a long time lurker here, and now I thought I should probably show myself. I bought my '15 CT F-Sport two years ago new from the dealer, and during these two years I've done a couple of mods:
Injen Intake
HKS Exhaust
F-Sport Sway bars
BC BR Coilovers
AG M240 18" Wheels (Temporary until my Work VS-XXs come in)
Modellista Front Lip Spoiler & Side Skirts
TRD Rear Bumper Diffuser
I also have the StanceParts Front Air Cup Suspension Kit, but never had the chance to install it yet.
I've also added some little touches like the OEM sun visors, clean box, cup holder plates, and rear cupholders. All OEM.
I've been a long time lurker here, and now I thought I should probably show myself. I bought my '15 CT F-Sport two years ago new from the dealer, and during these two years I've done a couple of mods:
Injen Intake
HKS Exhaust
F-Sport Sway bars
BC BR Coilovers
AG M240 18" Wheels (Temporary until my Work VS-XXs come in)
Modellista Front Lip Spoiler & Side Skirts
TRD Rear Bumper Diffuser
I also have the StanceParts Front Air Cup Suspension Kit, but never had the chance to install it yet.
I've also added some little touches like the OEM sun visors, clean box, cup holder plates, and rear cupholders. All OEM.
#470
Driver School Candidate
Hello everyone,
I'm pretty excited to finally be a part of this thread. Although I haven't done anything major, I just wanted to start somewhere and inspire those who want to start but doesn't know where to begin.
Lexus CT200H base, 2014
eBay carbon fiber shift **** w universal fit
eBay off-brand wind guards (the reason why I chose these specific ones is because it deleted chrome off of my window trim [although, this product is pretty crappy])
Rhino Rack Vortex 2500 Aero: https://www.rackoutfitters.com/rhino...ase-roof-rack/
Yakima windshield fairing 40": https://www.rei.com/product/102619/yakima-windshield-40
I just installed my roof rack and I'm so ecstatic about how it came out. I can't wait for my next mods. I'm planning on...
putting yellow film over my fog lights
debadging the CT200H badge
getting Tanabe springs (1.5 drop all around)
getting wheels (still looking around)
maybe getting tail lights, or if I can't find good ones, then tinting the current ones that I have and brightening the bulbs
I have a lot in mind, but nothing too crazy. CT fam goin up cheeeehu
I'm pretty excited to finally be a part of this thread. Although I haven't done anything major, I just wanted to start somewhere and inspire those who want to start but doesn't know where to begin.
Lexus CT200H base, 2014
eBay carbon fiber shift **** w universal fit
eBay off-brand wind guards (the reason why I chose these specific ones is because it deleted chrome off of my window trim [although, this product is pretty crappy])
Rhino Rack Vortex 2500 Aero: https://www.rackoutfitters.com/rhino...ase-roof-rack/
Yakima windshield fairing 40": https://www.rei.com/product/102619/yakima-windshield-40
I just installed my roof rack and I'm so ecstatic about how it came out. I can't wait for my next mods. I'm planning on...
putting yellow film over my fog lights
debadging the CT200H badge
getting Tanabe springs (1.5 drop all around)
getting wheels (still looking around)
maybe getting tail lights, or if I can't find good ones, then tinting the current ones that I have and brightening the bulbs
I have a lot in mind, but nothing too crazy. CT fam goin up cheeeehu
The following 2 users liked this post by SalsaBoiii:
MadNICE702 (08-08-19),
soysauce (09-21-17)
#471
Driver School Candidate
Small Mods
Did some small mods to my 14' CT.
- Took off my front license plate to get that full JDM feel
- Debadged the CT200H badge on the right side of my trunk
- Make sure to purchase this to get all of the glue off when debadging
- Make sure to purchase this to get all of the glue off when debadging
- Installed LEDs for my headlights
- These LEDs are good for the price compared to others, but for me at least, I wish these LEDs traveled farther ahead than they do already. There is a lot of light projecting directly in front of the car, and also on the side of the car, but just not too far ahead. I don't mind it too much, as I can still drive without a problem.
- These LEDs are good for the price compared to others, but for me at least, I wish these LEDs traveled farther ahead than they do already. There is a lot of light projecting directly in front of the car, and also on the side of the car, but just not too far ahead. I don't mind it too much, as I can still drive without a problem.
- Yellow film over my fog lights
- After putting the yellow tint on my fog lights, I can barely even notice them on. Since I live in California, there is not too much fog to worry about, but if you live in a place where fog lights are necessary, do not purchase these.
- After putting the yellow tint on my fog lights, I can barely even notice them on. Since I live in California, there is not too much fog to worry about, but if you live in a place where fog lights are necessary, do not purchase these.
#472
Hello everyone,
I'm pretty excited to finally be a part of this thread. Although I haven't done anything major, I just wanted to start somewhere and inspire those who want to start but doesn't know where to begin.
Lexus CT200H base, 2014
eBay carbon fiber shift **** w universal fit
eBay off-brand wind guards (the reason why I chose these specific ones is because it deleted chrome off of my window trim [although, this product is pretty crappy])
Rhino Rack Vortex 2500 Aero: https://www.rackoutfitters.com/rhino...ase-roof-rack/
Yakima windshield fairing 40": https://www.rei.com/product/102619/yakima-windshield-40
I just installed my roof rack and I'm so ecstatic about how it came out. I can't wait for my next mods. I'm planning on...
putting yellow film over my fog lights
debadging the CT200H badge
getting Tanabe springs (1.5 drop all around)
getting wheels (still looking around)
maybe getting tail lights, or if I can't find good ones, then tinting the current ones that I have and brightening the bulbs
I have a lot in mind, but nothing too crazy. CT fam goin up cheeeehu
I'm pretty excited to finally be a part of this thread. Although I haven't done anything major, I just wanted to start somewhere and inspire those who want to start but doesn't know where to begin.
Lexus CT200H base, 2014
eBay carbon fiber shift **** w universal fit
eBay off-brand wind guards (the reason why I chose these specific ones is because it deleted chrome off of my window trim [although, this product is pretty crappy])
Rhino Rack Vortex 2500 Aero: https://www.rackoutfitters.com/rhino...ase-roof-rack/
Yakima windshield fairing 40": https://www.rei.com/product/102619/yakima-windshield-40
I just installed my roof rack and I'm so ecstatic about how it came out. I can't wait for my next mods. I'm planning on...
putting yellow film over my fog lights
debadging the CT200H badge
getting Tanabe springs (1.5 drop all around)
getting wheels (still looking around)
maybe getting tail lights, or if I can't find good ones, then tinting the current ones that I have and brightening the bulbs
I have a lot in mind, but nothing too crazy. CT fam goin up cheeeehu
#473
Driver
iTrader: (5)
Got my 13 CT about a couple months ago and got the mod bug:
18" SSR Professor SP1
Morimoto 5500k HIDs
Morimoto LED foglights
Black nipple antenna
LED bulb conversion all-around
15% tint
In progress:
Deciding drop (still under L certified warranty)
14+ front bumper conversion, might be up for sale....18+ looks doable
18" SSR Professor SP1
Morimoto 5500k HIDs
Morimoto LED foglights
Black nipple antenna
LED bulb conversion all-around
15% tint
In progress:
Deciding drop (still under L certified warranty)
14+ front bumper conversion, might be up for sale....18+ looks doable
#474
Driver School Candidate
Got my 13 CT about a couple months ago and got the mod bug:
18" SSR Professor SP1
Morimoto 5500k HIDs
Morimoto LED foglights
Black nipple antenna
LED bulb conversion all-around
15% tint
In progress:
Deciding drop (still under L certified warranty)
14+ front bumper conversion, might be up for sale....18+ looks doable
18" SSR Professor SP1
Morimoto 5500k HIDs
Morimoto LED foglights
Black nipple antenna
LED bulb conversion all-around
15% tint
In progress:
Deciding drop (still under L certified warranty)
14+ front bumper conversion, might be up for sale....18+ looks doable
#477
Driver School Candidate
Join Date: Nov 2017
Location: FL
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
Need help with front camber, its currently -2 degrees with SPC Cam bolts but I'm trying to achieve at least -4... Here's what it currently looks like and I will be lowering it an inch lower to hide the wheel gaps.
#478
Looks clean. What are you lowered on and what size rims you have?
#479
Driver School Candidate
Someone in this thread should start a car club for CTs
Y'all have some really nice, modded CTs and I'm sure we can get something going. I want to be a part of a car club but there's none out there for our cars *sigh*.
I'm in California around the South Bay/Fullerton area btw.
Come on, let's do this y'all!
Y'all have some really nice, modded CTs and I'm sure we can get something going. I want to be a part of a car club but there's none out there for our cars *sigh*.
I'm in California around the South Bay/Fullerton area btw.
Come on, let's do this y'all!
#480
Driver
iTrader: (5)
[QUOTE=Dirteeboy;10008351]Got my 13 CT about a couple months ago and got the mod bug:
18" SSR Professor SP1
Morimoto 5500k HIDs
Morimoto LED foglights
Black nipple antenna
LED bulb conversion all-around
15% tint
Added:
14+ F sport front bumper
Lamin X yellow tint fogs
F Sport blue springs (sucks as low as I can go, still under L certified warranty)
18" SSR Professor SP1
Morimoto 5500k HIDs
Morimoto LED foglights
Black nipple antenna
LED bulb conversion all-around
15% tint
Added:
14+ F sport front bumper
Lamin X yellow tint fogs
F Sport blue springs (sucks as low as I can go, still under L certified warranty)