Forced air intake for Es300's!
#1
Lead Lap
Thread Starter
Go check out my pics, what do you guys think, looks nice?
Finally a Forced cold air intake for our ES300's! 92-96
Let me know! I have worked on it a long time and I’m dying for feedback. Any one with and ES feel free to ask me any questions about it, I’m also working on a 97 and up intake!
"Alias Racing Intakes!" For ES300's only!
Not for the SC, GS not even the LS…the ES damn it we deserve it!
Forced air rocks, not just a CAI it would be a FCAI
Forced cold air intake, kinda like Ram air!
This is a pic of the ram air scoop cut with a special curve mouth that buts up against the bumper opening to maximize forced air, and the filter is way back in the engine bay, that’s the only way you can get forced air, because by the time it hits your filter its already going at a high velocity where as if the filter sits in the bumper, the filament hits the air right away, and it doesn’t have a chance to get forced into the pipe at no immediate restriction. It also keep the filter away from water and snow, I have gone through huge rain puddles with nothing but awesome performance out of it.
Finally a Forced cold air intake for our ES300's! 92-96
Let me know! I have worked on it a long time and I’m dying for feedback. Any one with and ES feel free to ask me any questions about it, I’m also working on a 97 and up intake!
"Alias Racing Intakes!" For ES300's only!
Not for the SC, GS not even the LS…the ES damn it we deserve it!
Forced air rocks, not just a CAI it would be a FCAI
Forced cold air intake, kinda like Ram air!
This is a pic of the ram air scoop cut with a special curve mouth that buts up against the bumper opening to maximize forced air, and the filter is way back in the engine bay, that’s the only way you can get forced air, because by the time it hits your filter its already going at a high velocity where as if the filter sits in the bumper, the filament hits the air right away, and it doesn’t have a chance to get forced into the pipe at no immediate restriction. It also keep the filter away from water and snow, I have gone through huge rain puddles with nothing but awesome performance out of it.
#2
air intake
Do you have more pics of this car , I have a 93 ES ?
does this pipe go back to the stock air filter or
did you change that ?
has there been a improvement on preformance?
what did you do with the air sensor?
I know that I am asking a lot of questions, but I
only want to change things on my ES if it
improves, not decreases its preformance.
Thanks alvin
does this pipe go back to the stock air filter or
did you change that ?
has there been a improvement on preformance?
what did you do with the air sensor?
I know that I am asking a lot of questions, but I
only want to change things on my ES if it
improves, not decreases its preformance.
Thanks alvin
#4
WOW! :eek: that is nice! And you did that your self?!?
Why is the flow sensor so big ? mine doent look anything like that......
you should more of those cuae bet some other es owners (Including me) would buy one...........
did you make the strut bar also? and the battery thing to?
man the realy looks nice good job!
MFA
Why is the flow sensor so big ? mine doent look anything like that......
you should more of those cuae bet some other es owners (Including me) would buy one...........
did you make the strut bar also? and the battery thing to?
man the realy looks nice good job!
MFA
#5
Lead Lap
Thread Starter
I think that the air flow sensor is different in 93, I need pics of your engine to make the intake for you, I did make it all my self, I have a little work shop in my garage. I have all the metal saws and drills to make it. I even bought some tools to make it easier on me.
If you are interested in it I will totally fabricate one for you. Yes I do feel better performance, not as much with just the intake itself, but with the whole AC2I cold air system that I designed. It seems a lot quicker and more responsive it also sound freakin awesome!!!!!!!! A nice racy sound that only a performance intake can give you! Don’t bother looking around for them, this is the only cold air setup like this for the ES300 ever, the only one in existence. The only one that is even similar is the EL Prototype one, but it has the filter down in the bumper and it doesn’t get true forced air, but it does get cold air, and its also more susceptible to rain and water. This is the way to go.
Oh yah, your car rocks too! Nice and clean looking, where did you get your clear corners? I did mine myself.
If you are interested in it I will totally fabricate one for you. Yes I do feel better performance, not as much with just the intake itself, but with the whole AC2I cold air system that I designed. It seems a lot quicker and more responsive it also sound freakin awesome!!!!!!!! A nice racy sound that only a performance intake can give you! Don’t bother looking around for them, this is the only cold air setup like this for the ES300 ever, the only one in existence. The only one that is even similar is the EL Prototype one, but it has the filter down in the bumper and it doesn’t get true forced air, but it does get cold air, and its also more susceptible to rain and water. This is the way to go.
Oh yah, your car rocks too! Nice and clean looking, where did you get your clear corners? I did mine myself.
#6
Lead Lap
Thread Starter
Alvin, is that you engine bay in the gallery? What are those knobby things on the bumper under the lights?
And did your lights come stock clear like Ero style or what where did you get them?
And does your strut bar rub on the intake manifold when you put it in reverse?
And did your lights come stock clear like Ero style or what where did you get them?
And does your strut bar rub on the intake manifold when you put it in reverse?
#7
Lead Lap
Thread Starter
After looking at the engine bay again of the green ES in the gallery I realized that it does have the same air flow sensor as mine, I think that is your car right Alvin, so why doesn't it look the same as yours? The chrome cone filter is not part of the sensor, you know that right?
I think that the sensor changed in 94 so 92-93 looks just like mine and 94-96 has a smaller sensor. The chrome cone filter is not part of the sensor, you know that right?
I think that the sensor changed in 94 so 92-93 looks just like mine and 94-96 has a smaller sensor. reverse?
I think that the sensor changed in 94 so 92-93 looks just like mine and 94-96 has a smaller sensor. The chrome cone filter is not part of the sensor, you know that right?
I think that the sensor changed in 94 so 92-93 looks just like mine and 94-96 has a smaller sensor. reverse?
Trending Topics
#8
I also notice that little thing
I think that is the head light washer like the Benz and BM has. That is creative mod!
I sent you PM about the FCA2i(haha, getting longer and longer)
my email is chrislee8@hotmail.com, send me the quotes and time you need and payment arrangement.
alvin, is that green es yours, where did you get the Strut bar?
have you guys looked at the white ES in Atlanta meet? bodykit man, looks nice, i want my bodykit!!!!!!!!
I sent you PM about the FCA2i(haha, getting longer and longer)
my email is chrislee8@hotmail.com, send me the quotes and time you need and payment arrangement.
alvin, is that green es yours, where did you get the Strut bar?
have you guys looked at the white ES in Atlanta meet? bodykit man, looks nice, i want my bodykit!!!!!!!!
#9
Yes The Green Lex ES300, Is my car L_sport
The Black things under the lights are head light
washers, this is a Canadian option. Also the
clear lights I did my self, I took out the orange.
By the way your intake is Hot, Email me the
cost for that mod... check your private page
The Black things under the lights are head light
washers, this is a Canadian option. Also the
clear lights I did my self, I took out the orange.
By the way your intake is Hot, Email me the
cost for that mod... check your private page
#14
L sport man how do u do it
you are like the only one i know come up with stuff for the es
i was really thinking bout gettin another car cuz i coudltn get nething for my car
but now with u i think there might be hope
hey where are you located in california
how much for the intake and to clear my head lights?
also does the filter use a K&n
cuz i was thinking of gettin one at carparts.com cuz if u use code ps1 u can get 20 of 50 so it comes out to be like 40 shipped to ur door
what do u suggest?
get the k&n or not
oh yea the company i work for owns a lex dealer and i went over there and the parts guy said to get one cuz it will save on gas mileage too?
is this true
man did u know lsport rims are amazingly expensive even for the dealers
18s go for liek 5gs at cost for them
my email is cia81@aol.com
please give me a quote
also im in Los angeles
you are like the only one i know come up with stuff for the es
i was really thinking bout gettin another car cuz i coudltn get nething for my car
but now with u i think there might be hope
hey where are you located in california
how much for the intake and to clear my head lights?
also does the filter use a K&n
cuz i was thinking of gettin one at carparts.com cuz if u use code ps1 u can get 20 of 50 so it comes out to be like 40 shipped to ur door
what do u suggest?
get the k&n or not
oh yea the company i work for owns a lex dealer and i went over there and the parts guy said to get one cuz it will save on gas mileage too?
is this true
man did u know lsport rims are amazingly expensive even for the dealers
18s go for liek 5gs at cost for them
my email is cia81@aol.com
please give me a quote
also im in Los angeles
#15
Driver School Candidate
Join Date: May 2001
Location: grand rapids, MI
Posts: 28
Likes: 0
Received 0 Likes
on
0 Posts
wow L_sport
seems like you are going to be having a lot of business comin to you soon.
and i guess i am one more to add to your list of poeple that want one of those intakes
please email me with the details as well
boxster004@yahoo.com
thanks
Andy
seems like you are going to be having a lot of business comin to you soon.
and i guess i am one more to add to your list of poeple that want one of those intakes
please email me with the details as well
boxster004@yahoo.com
thanks
Andy