Brake system issue
#1
Brake system issue
ok so my brake pedal isnt firm anymore. i had the brakes blead and still it goes to the floor. So i switched out the master cylander and it was better but still went to the floor very easily. And once stopped the vehicle would slowly start creeping forward. so i thought somewhere i had missed a bubble in the system, took it to my trusted shop and they blead the lines. it was a little better but now its the same problem. Im thinking i got a bad master cylander. anyone have an idea?
#2
If it's the same with a new master cylinder odds are it is something else.
Not sure on the system, but there may be a check valve in the ABS pump that is letting fluid by. If it has a piece of dirt under it you may clear it by activating the ABS. Find some ice or snow (should be easy in CO) make it skid a while and the pulsing should blow any crap from under a check valve.
Not sure on the system, but there may be a check valve in the ABS pump that is letting fluid by. If it has a piece of dirt under it you may clear it by activating the ABS. Find some ice or snow (should be easy in CO) make it skid a while and the pulsing should blow any crap from under a check valve.
Thread
Thread Starter
Forum
Replies
Last Post