ES - 1st to 4th Gen (1990-2006) Forum for all 1990 - 2006 ES300 and ES330 models. ES250 topics go here as well.

door lock problem

Thread Tools
 
Search this Thread
 
Old 01-08-07, 06:30 PM
  #1  
98_es300
Driver School Candidate
Thread Starter
 
98_es300's Avatar
 
Join Date: Nov 2006
Location: va
Posts: 28
Likes: 0
Received 0 Likes on 0 Posts
Default door lock problem

im gonna try and explain it as best as i can w/o confusing you guys.

(i have a 98 es300 ~94k miles) whenever i usually drive i drive with the doors locked. now when i unlock the doors to let passengers out (primarily in the front) the door locks will repeatedly click and unlock, even all the doors are already unlocked. ( it drives me crazy )


have you guys experience anything like this? any help would greatly be appreciated!

thanks
Old 01-10-07, 03:17 PM
  #2  
Brando
Driver
 
Brando's Avatar
 
Join Date: Apr 2001
Location: Allen, Texas
Posts: 155
Likes: 0
Received 1 Like on 1 Post
Default

Yes, mine did the same thing. You have a lock that is going out. It is not locking or unlocking all the way. Once you find out which one it is just buy a replacement lock off ebay and change it out. Or get a mechanic to do it for you. I have done two so far on my 93 ES.
Old 01-10-07, 03:18 PM
  #3  
Brando
Driver
 
Brando's Avatar
 
Join Date: Apr 2001
Location: Allen, Texas
Posts: 155
Likes: 0
Received 1 Like on 1 Post
Default

Or if you dont want to mess with it you can just take the door panel off and unplug that lock. You will just have to lock it manually till you get it fixed. Makes it less annoying till you do.
Old 01-10-07, 04:26 PM
  #4  
98_es300
Driver School Candidate
Thread Starter
 
98_es300's Avatar
 
Join Date: Nov 2006
Location: va
Posts: 28
Likes: 0
Received 0 Likes on 0 Posts
Default

thanks for the response.


how hard is it to change out a lock? is there a specific name to the part that i need to replace? or is it just called a door lock mechanism?


thanks again


is this the part i would replace/buy?
http://cgi.ebay.com/ebaymotors/97-01...spagenameZWD1V

Last edited by 98_es300; 01-10-07 at 07:59 PM.
Old 01-11-07, 06:10 AM
  #5  
Brando
Driver
 
Brando's Avatar
 
Join Date: Apr 2001
Location: Allen, Texas
Posts: 155
Likes: 0
Received 1 Like on 1 Post
Default

It is called a door lock actuator. It is kinda tricky but not too bad. You have to remove the door lock disconnecting it from the outside and inside door handles. For the front door I had to remove the window as it was too tight with it in there. It was easier on the back door.
Old 01-11-07, 06:12 AM
  #6  
Brando
Driver
 
Brando's Avatar
 
Join Date: Apr 2001
Location: Allen, Texas
Posts: 155
Likes: 0
Received 1 Like on 1 Post
Default

Sorry didnt notice your link. Yeah that picture is of the part I used but for a 93. That whole piece comes out through the inside of the door.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
PandaGS300
GS - 2nd Gen (1998-2005)
7
10-05-16 03:31 PM
frotiss
IS F (2008-2014)
5
12-30-12 07:59 PM
Orozco27
IS - 2nd Gen (2006-2013)
5
08-04-12 02:32 AM
blazinBIG
ES - 1st to 4th Gen (1990-2006)
0
04-29-12 08:25 PM



Quick Reply: door lock problem



All times are GMT -7. The time now is 02:19 AM.