es300 wiring diagram
#1
Driver
Thread Starter
Join Date: Feb 2001
Location: Kentucky
Posts: 172
Likes: 0
Received 0 Likes
on
0 Posts
es300 wiring diagram
I need some help.
I have no power on the radio. I need to know what color are the main power (memory) and the keyed power(ign1) wires or also where they are located on the harness that goes into the reciever..
Any help would be great..
Thanks,
Scott
I have no power on the radio. I need to know what color are the main power (memory) and the keyed power(ign1) wires or also where they are located on the harness that goes into the reciever..
Any help would be great..
Thanks,
Scott
#2
Lexus Test Driver
Join Date: Oct 2001
Location: Illinois
Posts: 1,522
Likes: 0
Received 0 Likes
on
0 Posts
Scott:
I hope that someone else replies to this thread. In the mean time just in case you have everything out, I can tell you that on my experience on Toyotas the Power is the red wire. The Accessory power is the yellow (power ignition).
Black of course is the ground.
I hope this little hint helps..
Carlos
I hope that someone else replies to this thread. In the mean time just in case you have everything out, I can tell you that on my experience on Toyotas the Power is the red wire. The Accessory power is the yellow (power ignition).
Black of course is the ground.
I hope this little hint helps..
Carlos
#3
Driver School Candidate
Join Date: Sep 2001
Location: Ma
Posts: 11
Likes: 0
Received 0 Likes
on
0 Posts
I actually labeled my wires when I installed my radio….i have everything but the speakers I can tell you everything you know when I get a moment to remove my stereo to install new speakers
#4
Driver
Thread Starter
Join Date: Feb 2001
Location: Kentucky
Posts: 172
Likes: 0
Received 0 Likes
on
0 Posts
diagram
Yeah...
Let me know as soon as you get a chance. No radio sucks..
Someone evidently put in an aftermarket and cut the wires and then tried to patch them up... But there is only one source of power with the key on. and no power with the key off.. A real hack job..
I hope after the power is on that the speakers work..
BTW, I only need the power, keyed, and ground wire colors or places on the connector.
Thanks,
Scott
wscottwilliams@home.com
Let me know as soon as you get a chance. No radio sucks..
Someone evidently put in an aftermarket and cut the wires and then tried to patch them up... But there is only one source of power with the key on. and no power with the key off.. A real hack job..
I hope after the power is on that the speakers work..
BTW, I only need the power, keyed, and ground wire colors or places on the connector.
Thanks,
Scott
wscottwilliams@home.com
#5
Colour Codes
gray pin 3 is ACC
pink\blue pin 1 is amp+
white pin 11 is ground
brown pin 5 is mute
green red pin 8 is ant+
this is from clip A to the deck
clip B goes to the CD changer
Alvin
Green ES 300
pink\blue pin 1 is amp+
white pin 11 is ground
brown pin 5 is mute
green red pin 8 is ant+
this is from clip A to the deck
clip B goes to the CD changer
Alvin
Green ES 300
Trending Topics
#12
Originally posted by 92lex
I ended up combinding the front dash and doors together. I know that this will change the ohm load on the stereo, but hat the hey.... it still sounds good to me
I ended up combinding the front dash and doors together. I know that this will change the ohm load on the stereo, but hat the hey.... it still sounds good to me
#15
Why do you need a remote off the factory amp? Use the antenna wire off the deck, or off the real antenna in the trunk. I labeled the speakers on the amp s the are only 4 wires left, jjust check them with a volt meter. I replaced the whole sound system or I would check for you.