300man

..JFI here is a GOOD 14 minute video on how to use seafoam. since many people are taking notice of this chemical cleaner..I've been using it for years and years..
here's a good video..maybe made right from the company.

http://video.google.com/videoplay?do...=seafoam&hl=en

and here: http://www.youtube.com/results?searc...&search=Search

Xterminate

it looks easy but i'm still a n00b and too scared to take parts out

Rollin'ES3

Theres nothing to it. Cars are easy. All it takes is experience, just get in there and get dirty. Thats how I got to where I am today

calichris

iTrader: (2)

kinda afraid to do it myself, can someone right out a step by step process of how to do it on our es's

BadViper22

Does this engine look familiar to you?
http://www.youtube.com/watch?v=SZf4WXwVL_E

calichris

iTrader: (2)

maybe a tad, mine says lexus no but arent you supposed to put some in the tank some in the vacuum line and the rest somewhere else?

BadViper22

1/3 a can in the brake booster line, a 1/3 of a can in the oil, and the final 1/3 in the gas tank. After a quick drive around town take it to get an oil change and get new spark plugs.

calichris

iTrader: (2)

deal, is there a big difference after using it?

BadViper22

Absolutely; your car will accelerate much faster, smoother idle, notably better mileage, and in the long run your car will last much longer. Best 5 bucks you'll ever spend on your engine. (Although the oil and plugs will cost you, it's the thought that counts)

Rollin'ES3

I gotta do this soon myself....I'm at 68k so I should be changing plugs out soon. Might as well do this with these old plugs

Next oil change

tuan92129

Still too scared to do this....adding the Seafoam to the vacuum hose sounded like..choking the engine
I think I'll let my mechanic do it at my next oil change.

calichris

iTrader: (2)

what if i just recently replaced my spark plugs would i have to again?

rtk7

so.. do you add 1/3 1/3 1/3 to the places than shut the car off? than 5-10 minutes later you start it and rev it? or let it run the whole time than rev it?

oh and whats a decent spark plugs that i should get? and how much are they?its a 1995 es300

benny20

Got a sarcastic email back from Seaform, saying" We dont ship this product to the UK" so we are missing out on theis great product , unless you guys know of any dealer or members that would, wrote back to them saying " No need for the Attitude we only asked. PS we were going to buy 500 tins of seaform but now ..... !!!!!!!!!

Bennyandthejets UK

Rollin'ES3

You can add 1/3-1/2 to the vacuum lines, 1/3-1/2 in the engine oil, and 1/3-1 in the gas tank. Only add 1 full pint to the tank if its full.

You first can add the 1/3-1/2 to the engine oil. Then put 1/3-1/2 to the vacuum hose, then shut it off after its all gone. (NOTE: ALLOW THE SEAFOAM TO SLOWLY GO THRU THE VACUUM HOSE, DONT LET THE CAR SUCK IT ALL UP TOO QUICKLY, TOO MUCH AT ONE TIME CAN CAUSE HYDRO-LOCK.)
Now let the car sit for 5-10 minutes.

Reattach the hoses/lines so its safe for driving. Now turn the car on and prepare for a lot of white smoke!!!!!

Now you can rev it, and drive around till the smoke goes away. (Takes 5-10 mins. of hard driving)

Now afterwards, Change your engine oil out.

Thats it