ES - 1st to 4th Gen (1990-2006) Forum for all 1990 - 2006 ES300 and ES330 models. ES250 topics go here as well.

Overheating issue

Thread Tools
 
Search this Thread
 
Old 02-26-08 | 10:18 PM
  #16  
Poizun's Avatar
Poizun
Driver School Candidate
 
Joined: Feb 2008
Posts: 45
Likes: 0
From: Maryland
Default

ok i got a update on my 96es300, i got it back today and they said they replaced the thermostat. they said that was the problem. i drove it to work, then drove it home, to the store, and back home, let it sit for 10 minutes, then drove back to the carwash to vaccumm and i left it running and it didnt overheat, do you think that was the problem?

although, i can hear bubbling sometimes when i slow down at a red light, anybody kno what that could be?
Old 03-02-08 | 09:46 AM
  #17  
itgrowsind's Avatar
itgrowsind
Thread Starter
Driver
 
Joined: Jun 2006
Posts: 172
Likes: 0
From: nowhere
Default

I will hear the bubbles when I get home and everyday I check the water Resevoir and It is almost completely empty everyday? do you know what could be causing it?
Old 03-02-08 | 07:27 PM
  #18  
lexified14's Avatar
lexified14
Driver School Candidate
 
Joined: Feb 2008
Posts: 25
Likes: 0
From: Illinois
Default

maybe there are air pockets still in the system.
Old 03-24-08 | 12:37 PM
  #19  
Brando's Avatar
Brando
Driver
 
Joined: Apr 2001
Posts: 155
Likes: 1
From: Allen, Texas
Default

I had the same problem. The car would never overheat but I could hear it boiling in the reservoir. When I stopped I could see it running out the overflow tube. I replaced the caps, thermostat and all, but the thing that finally fixed it was replacing the two sensors. One was the temperature sensor for the gauge which did nothing and the other that finally did the trick was the sensor next to the temp gauge sensor called the cold start switch /engine temp sensor. This one tells the ecu what the temp of the motor is and to adjust settings accordingly. Mine was broken by the mechanic who did my timing belt and spark plugs. It was literally snapped in half. It was old and brittle. It might be worth a try replacing it. I got a used one off ebay for 10 bucks and it fixed it right away. Just match it up to the part number and picture. I did a search on Toyota cold start sensor. I got mine from this guy mmccul3797. He puts them up every week so if you dont see one now just wait and he will post one. Hope that helps.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
ellie12mae
GS - 2nd Gen (1998-2005)
10
02-20-18 08:10 PM
Studiogeek
Performance & Maintenance
11
11-24-13 04:15 PM
Salil022
GS - 2nd Gen (1998-2005)
19
05-12-11 02:35 PM
DallasSC
Performance & Maintenance
9
03-24-11 10:16 PM




All times are GMT -7. The time now is 07:42 PM.