Car Dropped - Before and After Pics
#17
Sup Ken, Looks good man so you're running Tein springs with what struts? Hey do you ever carry a full load in the car. You know like 5 peeps at one time? I want to lower the wifes car but am afraid it will rub with a full load. I'm kind of a heavy guy to begin with. So with that many adults in the car I don't want to bottom out or rub. Not to mention the wife will be pissed if that happens. LMK
Thanks,
Thanks,
I'm running the KYB GR-2 struts and as of right now I have 2 little kids in the back in which their car seats take up the space so no plans on carrying a full load until their old enough to be out of car seats. I'll most likely have a new car b4 that happens.
#18
#19
Just to be more clear for everyone here's exactly what I have including model numbers.
KYb GR-2
334170 Front Right
334171 Front Left
334133 Rear Right
334134 Rear Left
Tein S-Tech
model SKL16 = 99-03 Solara V6
My car is a 94 ES300
The parts above should fit ES300 92 - 96
KYb GR-2
334170 Front Right
334171 Front Left
334133 Rear Right
334134 Rear Left
Tein S-Tech
model SKL16 = 99-03 Solara V6
My car is a 94 ES300
The parts above should fit ES300 92 - 96
Last edited by kphu; 03-27-08 at 11:45 AM.
#20
yeah, looks good K. Make sure you take good daytime pictures of the ES. Nobody said you can't be a low rida with two kids in the back. Your secret is safe with us.
check it out boys, I am wearin my gold badge proudly...that's for Slooooow.
check it out boys, I am wearin my gold badge proudly...that's for Slooooow.
#26
Thanks so much for providing that information, kphu!
It motivated me to update the 2nd gen KYB part numbers (also inspired by Badviper22 ) which I've done.
In the listing, Felony from TN had already given me the Solara Tein S-techs as a possibility, but no one had the part number - you just fixed that for us!
Thanks again, and grats on the upgrade!
It motivated me to update the 2nd gen KYB part numbers (also inspired by Badviper22 ) which I've done.
In the listing, Felony from TN had already given me the Solara Tein S-techs as a possibility, but no one had the part number - you just fixed that for us!
Thanks again, and grats on the upgrade!
#29
The Tein S-techs are the only part I've received cross-compatibility confirmation about from either this ES forum or the 3rd gen Camry forum over on TN.
Note that on the KYBs they even have different struts for the 92-94 versus the 95-96. Bizarre.
#30