Heavy steering effort, solved
06-24-08, 05:35 PM
#1
Driver School Candidate
Thread Starter
Join Date: Nov 2006
Location: Hong Kong
Posts: 39
Likes: 0
Received 0 Likes
on
0 Posts
Heavy steering effort, solved
My 2000 Windom have heavy steering wheel lately, first suspect is power steering belt slip since the inner CV join was break and oil goes on the pulley. Replaced both and still have heavy steering. Later found out the universal joint from steering column to the rack was blind in 1 direction. Changed that and steering goes fine now, hope this info can help you guys.
06-25-08, 07:33 AM
#2
Lexus Champion
thanks for sharing
so, you have a good taste in cars if I do say so myself... your 540i doesn't happen to be a 6speed, does it? [on the internet they write it like this 540i6 ]
so, you have a good taste in cars if I do say so myself... your 540i doesn't happen to be a 6speed, does it? [on the internet they write it like this 540i6 ]
06-25-08, 04:12 PM
#3
Driver School Candidate
Thread Starter
Join Date: Nov 2006
Location: Hong Kong
Posts: 39
Likes: 0
Received 0 Likes
on
0 Posts
Thx for your word on my pick of cars...
my 540 is auto,steptronic in BMW terms..
Will trade it soon for a RX350 or GS300(Damn, no GS350 nor 430 inHong Kong).... gas was expensive now...
my 540 is auto,steptronic in BMW terms..
Will trade it soon for a RX350 or GS300(Damn, no GS350 nor 430 inHong Kong).... gas was expensive now...
Last edited by bensonc; 06-25-08 at 05:05 PM. Reason: add info
Thread
Thread Starter
Forum
Replies
Last Post
