ES - 1st to 4th Gen (1990-2006) Forum for all 1990 - 2006 ES300 and ES330 models. ES250 topics go here as well.

Flex pipe problem NEED RECOMMENDATIONS

Thread Tools
 
Search this Thread
 
Old 10-30-08 | 02:39 PM
  #1  
Ariyanna's Avatar
Ariyanna
Thread Starter
Lead Lap
 
Joined: Mar 2006
Posts: 624
Likes: 0
From: NJ
Default Flex pipe problem NEED RECOMMENDATIONS

Hey guys today me and my dad went underneath the car because I was hearing a drone in my exhaust while driving and found out that my flex pipe has a small hole in it, it is located right on the main flex. Now I dont know what to do because I went online to get a price on the flex and its $1200 for it because it comes attached with the catalic . Now I dont know if its possible to just have the flex part replaced on the pipe or if I have to replace the whole thing. Someone chime in thanks
Old 10-30-08 | 03:26 PM
  #2  
tim_man's Avatar
tim_man
Driver School Candidate
 
Joined: Jun 2008
Posts: 9
Likes: 0
From: PA
Default

go on ebay and look the part up i seen one for about 104.00 brand new without the cat
Old 10-30-08 | 03:29 PM
  #3  
Slooooooow's Avatar
Slooooooow
Regional Officer - NTL
iTrader: (1)
 
Joined: May 2005
Posts: 2,878
Likes: 1
From: TX
Cool

I had an entire custom-made exhaust system (custom y-pipe back through the muffler) for roughly $1200. Keep shopping!You should only be paying for a needed amount of flex and the cost for the installation labor.
Old 10-30-08 | 03:33 PM
  #4  
Ariyanna's Avatar
Ariyanna
Thread Starter
Lead Lap
 
Joined: Mar 2006
Posts: 624
Likes: 0
From: NJ
Default

I saw your post really nice, I would like to do what you did but I live in Jersey and you said it was a little loud in the cabin for you. Is it possible to just replace the flex joint? You know cut it off and weld a new one on SLOWWW? Can I email you pics of the exhaust?
Old 10-30-08 | 03:48 PM
  #5  
Slooooooow's Avatar
Slooooooow
Regional Officer - NTL
iTrader: (1)
 
Joined: May 2005
Posts: 2,878
Likes: 1
From: TX
Cool

Originally Posted by Ariyanna
I saw your post really nice,
Well thank you.
Originally Posted by Ariyanna
you said it was a little loud in the cabin for you.
It was until I replaced the Magnaflow muffler with an OEM one. I LOVE my exhaust system now. Custom y-pipe, a racing catalytic converter, a resonator (or two), custom larger piping and a quiet muffler is definitely the way to go!
Originally Posted by Ariyanna
Is it possible to just replace the flex joint? You know cut it off and weld a new one on SLOWWW?
Yes, you can. That's exactly what I recommend that you do at a worthy, recommended muffler shop. With the national chain stores, you're living on the edge.
Old 10-30-08 | 03:54 PM
  #6  
Ariyanna's Avatar
Ariyanna
Thread Starter
Lead Lap
 
Joined: Mar 2006
Posts: 624
Likes: 0
From: NJ
Default

IS the exhaust as quiet as stock after you replaced the muffler with a OEM one???PM me your email
Old 10-30-08 | 04:05 PM
  #7  
LW ES300's Avatar
LW ES300
Driver
 
Joined: Aug 2008
Posts: 132
Likes: 1
From: Northern Westchester, NY
Default

What year is your ride. Depending on age & mileage it may be better to replace the entire pipe including the cat. Just did this on my 96 ES300 (151K) because check engine light was on & it wouldn't pass inspection in NY.

It listed for $1500 at 2 auto parts stores, but a friend of a friend's mechanic found a complete set for me for $300. Bosal, Magnaflow or Eastern Catalytic are good suppliers. Be sure whatever you get comes with gaskets and be prepared that the rear O2 sensor (another $50-100) may need to be replaced also as it's on top of the pipes. Spend a few days looking on eBay, you can find most anything there.

Here's a link: http://shop.ebay.com/items/__lexus-e...=p3286.c0.m104

Last edited by LW ES300; 10-30-08 at 09:16 PM.
Old 10-30-08 | 04:08 PM
  #8  
Ariyanna's Avatar
Ariyanna
Thread Starter
Lead Lap
 
Joined: Mar 2006
Posts: 624
Likes: 0
From: NJ
Default

its a 96 with 114k miles
Old 10-30-08 | 04:19 PM
  #9  
Slooooooow's Avatar
Slooooooow
Regional Officer - NTL
iTrader: (1)
 
Joined: May 2005
Posts: 2,878
Likes: 1
From: TX
Cool

Originally Posted by Ariyanna
IS the exhaust as quiet as stock after you replaced the muffler with a OEM one???PM me your email

Deeper and rumblier than stock, with no annoying high tones or resonance now. Louder than stock? Slightly, yes. But I doubt I would attract any attention from authorities in communities with hypersensitivity to exhaust sound levels.
Old 10-30-08 | 05:26 PM
  #10  
LW ES300's Avatar
LW ES300
Driver
 
Joined: Aug 2008
Posts: 132
Likes: 1
From: Northern Westchester, NY
Default

Originally Posted by Ariyanna
its a 96 with 114k miles
I just called my friend and this is what he found for me a few months ago. 1995-1998 Lexus ES300 - Eastern Catalytic Converter $250 + gaskets + tax = $300 (07/08). My car is also a 1996 ES300. Maybe this make/name can help, or check the distributors here in Club Lexus Vendor Marketplace.

Last edited by LW ES300; 10-30-08 at 09:29 PM.
Old 10-30-08 | 05:34 PM
  #11  
Ariyanna's Avatar
Ariyanna
Thread Starter
Lead Lap
 
Joined: Mar 2006
Posts: 624
Likes: 0
From: NJ
Default

link doesnt work
Old 10-30-08 | 07:03 PM
  #12  
ayonnebay's Avatar
ayonnebay
Lead Lap
 
Joined: Dec 2002
Posts: 436
Likes: 3
From: nj
Default

Originally Posted by Ariyanna
Now I dont know if its possible to just have the flex part replaced on the pipe or if I have to replace the whole thing.

I live in Jersey, too. New flex pipe cost me $300 (98 ES). Lexus wanted $4,100 saying entire exhaust system had to be replaced. Here's my prior post on it:

https://www.clublexus.com/forums/sho...d.php?t=292381

Post #10 in the thread shows the new flex pipe welded in.

Walt
Old 10-30-08 | 07:47 PM
  #13  
LW ES300's Avatar
LW ES300
Driver
 
Joined: Aug 2008
Posts: 132
Likes: 1
From: Northern Westchester, NY
Default

Originally Posted by Ariyanna
link doesnt work
Sorry, phone call and I got distracted while editing and forgot to get back. Try this, but this is Not eBay, but still very reasonable compared to anything done at Lexus: http://catalog.autohausaz.com/autoha...ic%20Converter

Or this with free ground shipping, but check your engine type this is for (1MZFE): http://www.autopartsauthority.com/oe...~oemparts.html

Spend time researching and see what others say here, people always have something. Hey Lexucan and Lexusk8, any thoughts on this subject??

Last edited by LW ES300; 10-31-08 at 05:19 PM.
Old 10-30-08 | 08:11 PM
  #14  
swifty562's Avatar
swifty562
Lead Lap
 
Joined: Jan 2006
Posts: 698
Likes: 0
From: ca
Default

i want Slooooooow

y-pipe =(


Old 10-31-08 | 05:09 PM
  #15  
Bdub215's Avatar
Bdub215
Lead Lap
iTrader: (1)
 
Joined: May 2008
Posts: 641
Likes: 12
From: Cheltenham, Pennsylvania
Default

I went to my local toyota dealer to find the price of one as my y-pipe has seen its better days. they said $1800. that sucks because im trying to sell this car for that price so mines is just gonna leak.


Quick Reply: Flex pipe problem NEED RECOMMENDATIONS



All times are GMT -7. The time now is 11:20 PM.