ES - 1st to 4th Gen (1990-2006) Forum for all 1990 - 2006 ES300 and ES330 models. ES250 topics go here as well.

Engine misfire? Not sure need help!!!

Thread Tools
 
Search this Thread
 
Old 01-14-09, 04:10 PM
  #1  
Ariyanna
Lead Lap
Thread Starter
 
Ariyanna's Avatar
 
Join Date: Mar 2006
Location: NJ
Posts: 624
Likes: 0
Received 0 Likes on 0 Posts
Default Engine misfire? Not sure need help!!!

Hey guys these past two days my car has had a pulsing feel to the engine when it is warm, when its cold its doesnt do it at all only when the car is warm. Also its more apparent when you turn the car back on after driving it will shake more right after turning it on when warm and goes away when you start driving it.

Now I went ahead and cleaned the EGR even though it was clean when I pulled it out, now im wondering if I have to take the IAC out and clean that but im not sure because I ran BG fuel injecter cleaner about two months ago so let me know what you guys think.
Old 01-14-09, 05:19 PM
  #2  
Lexmex
Super Moderator
 
Lexmex's Avatar
 
Join Date: Apr 2004
Location: Miami, Florida
Posts: 17,246
Received 162 Likes on 138 Posts
Default

Misfires result in certain codes that should show up P03XX. There are codes that can be locked in the computer known as pending codes that don't throw a check engine light, but still would indicate a problem. My girlfriend has a 99 Expedition that I could tell had a misfire, but the CEL wouldn't light up, but put in my code reader and sure enough it showed P0305 pending or pd.
Old 01-14-09, 06:58 PM
  #3  
Ariyanna
Lead Lap
Thread Starter
 
Ariyanna's Avatar
 
Join Date: Mar 2006
Location: NJ
Posts: 624
Likes: 0
Received 0 Likes on 0 Posts
Default

What do you think in your experience it could be???
Old 01-14-09, 07:43 PM
  #4  
HYPERBOY
Lexus Test Driver
 
HYPERBOY's Avatar
 
Join Date: Apr 2007
Location: florida
Posts: 1,069
Likes: 0
Received 0 Likes on 0 Posts
Default

i would runn a code check =]
Old 01-14-09, 10:59 PM
  #5  
Lexmex
Super Moderator
 
Lexmex's Avatar
 
Join Date: Apr 2004
Location: Miami, Florida
Posts: 17,246
Received 162 Likes on 138 Posts
Default

Originally Posted by HYPERBOY
i would runn a code check =]
Bingo, that's what needs to be done.
Old 01-15-09, 08:37 AM
  #6  
Ariyanna
Lead Lap
Thread Starter
 
Ariyanna's Avatar
 
Join Date: Mar 2006
Location: NJ
Posts: 624
Likes: 0
Received 0 Likes on 0 Posts
Default

OK I will go to autozone and check it out before pulling the IAC out thanks
Old 01-15-09, 04:53 PM
  #7  
Ariyanna
Lead Lap
Thread Starter
 
Ariyanna's Avatar
 
Join Date: Mar 2006
Location: NJ
Posts: 624
Likes: 0
Received 0 Likes on 0 Posts
Default

Went to autozone and the scanner found 0 codes not what could it be

Trending Topics

Old 01-16-09, 12:06 AM
  #8  
Ariyanna
Lead Lap
Thread Starter
 
Ariyanna's Avatar
 
Join Date: Mar 2006
Location: NJ
Posts: 624
Likes: 0
Received 0 Likes on 0 Posts
Default

OK guys I think Im getting warmer to the problem of my car and hopefully someone can guide me to the solution. I noticed that when I press on the windows switches the radio lights start to dime and then the car starts to pulsate again almost feels like a misfire and felt like the car wasn't getting enough power I let go of the switch and it goes away. This morning when I turned the car on it started very week and after that it would turn back on nice and strong. Is it the battery or the alternator????
Old 01-16-09, 05:53 AM
  #9  
Ariyanna
Lead Lap
Thread Starter
 
Ariyanna's Avatar
 
Join Date: Mar 2006
Location: NJ
Posts: 624
Likes: 0
Received 0 Likes on 0 Posts
Default

bump... ANYONE?
Old 01-16-09, 06:49 AM
  #10  
draco
Lexus Test Driver
 
draco's Avatar
 
Join Date: Aug 2007
Location: Western Australia (Australia)
Posts: 1,254
Likes: 0
Received 15 Likes on 11 Posts
Default

An old trick for the alternator would be to disconnect the battery while the car was running (i.e. pull the neg. cable). If the car died it pretty much would indicate that the alternator isn't working correctly. If the car keeps going then the alternator is doing it's job. That at least will eliminate the alternator.
Old 01-16-09, 08:08 AM
  #11  
Lexmex
Super Moderator
 
Lexmex's Avatar
 
Join Date: Apr 2004
Location: Miami, Florida
Posts: 17,246
Received 162 Likes on 138 Posts
Default

Virtually any car parts store could run a check on your battery.
Old 01-16-09, 08:58 AM
  #12  
BadViper22
Lexus Test Driver
 
BadViper22's Avatar
 
Join Date: Apr 2007
Location: FL, O-Town
Posts: 1,005
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by Lexmex
Virtually any car parts store could run a check on your battery.
That.^ (10char)
Old 01-18-09, 01:29 AM
  #13  
Ariyanna
Lead Lap
Thread Starter
 
Ariyanna's Avatar
 
Join Date: Mar 2006
Location: NJ
Posts: 624
Likes: 0
Received 0 Likes on 0 Posts
Default

OK guys went to autozone and they tested my battery and it failed so I bought a new battery and now my car turns on so good and strong but the motor still pulsates whenever I turn the car back on when warm and goes away if i press the throttle or if I start driving.. I have no idea what it could be
Old 01-18-09, 04:43 AM
  #14  
dallison
Intermediate
 
dallison's Avatar
 
Join Date: Sep 2005
Location: pa
Posts: 301
Received 0 Likes on 0 Posts
Default

mine was a coil pack
Old 01-18-09, 02:24 PM
  #15  
Walnut
Driver
 
Walnut's Avatar
 
Join Date: Oct 2006
Location: BC, Canada
Posts: 118
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by draco
An old trick for the alternator would be to disconnect the battery while the car was running (i.e. pull the neg. cable). If the car died it pretty much would indicate that the alternator isn't working correctly. If the car keeps going then the alternator is doing it's job. That at least will eliminate the alternator.
Haha you will permanently eliminate your alternator if you try this one! The voltage reg will jack the field current to the max, the output voltage will skyrocket, and all your diodes will blow.

In the old days the reg wasn't onboard the alt so I guess it might have been ok...


Quick Reply: Engine misfire? Not sure need help!!!



All times are GMT -7. The time now is 05:13 PM.