I want reall opinion please ahaha
06-10-09, 12:05 PM
#32
Lexus Test Driver
iTrader: (1)
Join Date: Sep 2005
Location: FL
Posts: 1,112
Likes: 0
Received 0 Likes
on
0 Posts
Heres on old pic of mines with some Yellow 3m Film I got online
I use standard h3 bulbs in mines, It does give off some yellow when on but not a whole lot like a 3k HID kit would or my favorite GS fogs do.
But it has improved bad weather lighting.
I wanted something different so I went with the yellow film cover
BTW I have 6500K HID in the low beams as well so it contrasts pretty nicely
I use standard h3 bulbs in mines, It does give off some yellow when on but not a whole lot like a 3k HID kit would or my favorite GS fogs do.
But it has improved bad weather lighting.
I wanted something different so I went with the yellow film cover
BTW I have 6500K HID in the low beams as well so it contrasts pretty nicely
06-10-09, 12:26 PM
#34
Heres on old pic of mines with some Yellow 3m Film I got online
I use standard h3 bulbs in mines, It does give off some yellow when on but not a whole lot like a 3k HID kit would or my favorite GS fogs do.
But it has improved bad weather lighting.
I wanted something different so I went with the yellow film cover
BTW I have 6500K HID in the low beams as well so it contrasts pretty nicely
I use standard h3 bulbs in mines, It does give off some yellow when on but not a whole lot like a 3k HID kit would or my favorite GS fogs do.
But it has improved bad weather lighting.
I wanted something different so I went with the yellow film cover
BTW I have 6500K HID in the low beams as well so it contrasts pretty nicely
I know Lamin-X sells them, i had quite a few people telling me to use them, but I know ebay has em too. Don't know how good those are though
That's exactly what I'm wondering about...here's why.
One of my fog lamp bulbs finally burned out and I'm tempted by the 3k HIDs on LuxuryMods.com (and some 4.5ks for my low beam lights).
But we have repeated forum examples - and folks report real-time examples in their cities/areas - of people installing "plug'n'play" HID kits that completely BLIND oncoming traffic. How much worse are HID fog lights - especially when installed in non-HID housings?!
Somebody help us out here...
One of my fog lamp bulbs finally burned out and I'm tempted by the 3k HIDs on LuxuryMods.com (and some 4.5ks for my low beam lights).
But we have repeated forum examples - and folks report real-time examples in their cities/areas - of people installing "plug'n'play" HID kits that completely BLIND oncoming traffic. How much worse are HID fog lights - especially when installed in non-HID housings?!
Those that install such systems tend to concentrate more on how it makes their car look and/or how much better they illuminate the road, instead of considering other drivers' ability to see.
Those of you that have installed the HID fogs...test your cutoff and photograph it for us? Nothing talks like sharp, defined, clean cutoff.Somebody help us out here...
Last edited by DixonPai; 06-10-09 at 12:32 PM.
Thread
Thread Starter
Forum
Replies
Last Post
