underdrive pulleys
11-04-09, 05:12 PM
#16
Rookie
Thread Starter
Join Date: Sep 2009
Location: nj
Posts: 74
Likes: 0
Received 0 Likes
on
0 Posts
ok did get a confirmation e-mail from pay-pal that the order has gone through. i will wait till tomorrow's business hours to get belt part #'s & which color i would like out of the two offered. best money i spent in a longtime. shipping is through the postal service priority at $12.50 not bad at all. can't wait to have it all installed!!!
11-04-09, 11:11 PM
#19
Rookie
Thread Starter
Join Date: Sep 2009
Location: nj
Posts: 74
Likes: 0
Received 0 Likes
on
0 Posts
NST, have contacted me about the e-mail i sent about the lack of performance parts for our engine 1mz. they showed interest in this forum & asked if i would give them the link to our thread here about NST. i really think the more who show interest that we are for real we want to mod our engines ,but can't due to the lack of companies making parts for the 1mz someone is gonna step to the plate & make more parts. they only gain to profit. this thread is what a day old & look at the interest. let it be known we are out here, & want to mod our engines.
11-05-09, 01:09 AM
#20
If anyone is interested, NST is just finishing up a group od LIGHTWEIGHT crank pulleys as well, NOT the underdrive ones. They now have both types.
And as for people saying these cars are not meant to be fast.....it;s all what you make it.
And as for people saying these cars are not meant to be fast.....it;s all what you make it.
Last edited by ASG14; 11-05-09 at 01:12 AM.
11-05-09, 08:33 AM
#21
Super Moderator
I'll recall my experience with my URD lightweight crankshaft pulley.
Shortly after it was installed, I really didn't feel much difference at first. I fondly recall in January 2006 the week before I took it to the track and clocked under 18 second in the 1/4 mile for the first time (7,411 feet elevation), that I had to run the vehicle at least 100 miles. I remember the accelerator pedal getting a bit harder and I could sense the difference with the pulley on there after that time. So when you get this pulley or for that matter any other performance part, give it and your vehicle's computer a chance to wear-in the product.
I remember a few years ago that there was a company that had made prototypes for a 3 pulley set, but I haven't heard from them in a long time, and don't think they are in business, but I would have at least jumped on getting the smaller pulleys to complement my existing one.
One thing I should mention as a moderator, but no one has run afoul yet (thank you), but do keep in mind this rule, https://www.clublexus.com/forums/faq...faq_group_buys
Shortly after it was installed, I really didn't feel much difference at first. I fondly recall in January 2006 the week before I took it to the track and clocked under 18 second in the 1/4 mile for the first time (7,411 feet elevation), that I had to run the vehicle at least 100 miles. I remember the accelerator pedal getting a bit harder and I could sense the difference with the pulley on there after that time. So when you get this pulley or for that matter any other performance part, give it and your vehicle's computer a chance to wear-in the product.
I remember a few years ago that there was a company that had made prototypes for a 3 pulley set, but I haven't heard from them in a long time, and don't think they are in business, but I would have at least jumped on getting the smaller pulleys to complement my existing one.
One thing I should mention as a moderator, but no one has run afoul yet (thank you), but do keep in mind this rule, https://www.clublexus.com/forums/faq...faq_group_buys
11-05-09, 12:41 PM
#22
Rookie
Thread Starter
Join Date: Sep 2009
Location: nj
Posts: 74
Likes: 0
Received 0 Likes
on
0 Posts
Thank you for your interest in our site and products, we appreciate it.
You should be able to use the following belts...
K040335
K060400
Your order is scheduled to ship out tomorrow via USPS Priority Mail and we will
be sure to send you a Gray crank pulley. Please keep an eye on your email
account for a USPS Priority Mail Confirmation Number.
Thanks again, good luck and have fun with all your projects!
You should be able to use the following belts...
K040335
K060400
Your order is scheduled to ship out tomorrow via USPS Priority Mail and we will
be sure to send you a Gray crank pulley. Please keep an eye on your email
account for a USPS Priority Mail Confirmation Number.
Thanks again, good luck and have fun with all your projects!
11-05-09, 01:08 PM
#23
I just ordered the pulley myself in red, my favorite color, lol. Also, I emailed NST about the belt part numbers and they stated that the numbers are for a Gates brand belts and the auto parts store should be able to cross reference them to another brand belt if needed. So, basically, per NST, just give the part number to the auto parts store of your choice and they will give you the appropriate belt. Ok, anyone know of a DIY on changing out the belts and crank pulley.........thanks.
11-05-09, 08:46 PM
#28
These pictures put a smile on my face. Legit.
11-05-09, 09:36 PM
#29
^ I will admit, thats my "Camry", lol. With an ES front end, but it;s the same as the ES300. I'm actually making a meet in Toronto next summer and hopign to rent a Road Course for a day for the meet. And yes, there will be a bunch of Camry's on the track, lol.
I need to start a thread for people to post pics of their ES's on a track......
I need to start a thread for people to post pics of their ES's on a track......
