need help with es 300 air bags 1997
11-23-09 | 06:19 PM
#2
There are two t screws on each side of the steering wheel under a plastic cover that you must pop out. Remove these screws - airbag comes off and then unhook connector. This has been covered before. Do a search.
11-23-09 | 07:30 PM
#3
Lead Lap
Joined: Apr 2008
Posts: 745
Likes: 0
From: tx
Make sure that you disconnect the battery and give it a few mins to discharge before proceding. One other point, place the airbag FACE UP whenever you put it on any surface. IE table, benchtop, etc. If the bag deploys you want the bag to coming at you, as opposed to having the metal mounting plate on the back of the unit coming at you.
A subtle point, but very important. This was much more important on the first generation bags, but still holds true today.
A subtle point, but very important. This was much more important on the first generation bags, but still holds true today.
Thread
Thread Starter
Forum
Replies
Last Post
Moohamp
ES - 1st to 4th Gen (1990-2006)
2
04-18-20 03:50 PM
hsmac
RX - 1st Gen (1999-2003)
6
05-23-16 08:50 PM
shabbyblue
GS - 2nd Gen (1998-2005)
2
03-15-12 09:06 PM
